-10%
Categories
- TOOLS SETS
-
ROLLER CABINETS AND WORKSHOP FURNITURE
-
TOOLBOXES, CASES AND CHESTS
- Fabric toolboxes
- Leather cases
- Organisers
- Plastic toolboxes
- Metal toolboxes
- Sachets
- Toolmat
-
Service cases
- BV.51A - polypropylene cases, 5 partitions, 486 x 430 x 205 mm
- Seria BV.FC - walizki szczelne
- BV.21 - polipropylene cases with sealed partitions, 530 x 390 x 180 mm
- BV.C - accessories for BV cases
- BV.61 - roller case with trolley system, 550 x 440 x 365 mm
- BV.21TR1 - roller case with trolley system, 530 x 390 x 180 mm
- BV.7A - leather fold - down front case, with partitions
- BV.5A - leather suitcases
- BV.16 - soft case, 440 x 315 x 75 mm
- BS.12 - soft case, 4 flaps, 430 x 320 x 130 mm
- Seria BV.R30PB - walizka dla technika na kółkach
- BS.R20 - Rolling soft bag, 550 x 360 x 440 mm
-
TORQUE CONTROL
-
"Multi-purpose" click wrenches
- 208 - Click wrenches with fixed ratchet, 5 - 340 Nm
- 208A - Click wrenches with fixed ratchet, 10 - 340 Nm
- 208D - Click wrenches without accessories, 10 - 340 Nm
- 209 - Click wrenches with fixed ratchet, 10 - 340 Nm
- 209A - Click wrenches with fixed ratchet, 10 - 340 Nm
- 209D - Click wrenches without accessories, 10 - 340 Nm
- 307A - "DIGI-CAL" torque wrenches with removable ratchet, 10 - 340 Nm
- 307D - "DIGI-CAL" torque wrenches without accessories, 10 - 340 Nm
-
"High performance" click wrenches
- 306M - wrenches with non removable ratchet, 5 - 340 Nm
- 306MF - wrenches with hinged ratchet, 100 - 340 Nm
- 306A - click wrenches with removable ratchet, 1 - 1000 Nm
- 306U - click wrenches with dual Ibf.in or Ibf.ft, supplied with removable ratchet
- R.306-5 - "Low torque" click wrench with fixed ratchet
- 306R - click wrenches with attachment 20 x 7 mm
- 306D - click wrenches without accessories, 1 - 1000 Nm
- 306D - sets with accessories, 5 - 350 Nm
-
Electronic torque wrenches
- E.516ST - Bluetooth electronic torque / angle wrenches with fixed ratchet, 1.5 - 340 Nm
- E.306D - Electronic torque wrenches without accessories, 1,5 - 340 Nm
- E.306A - Electronic torque wrenches with removable ratchet, 1,5 - 340 Nm
- E.316D - Electronic torque / angle measuring wrenches, without accessories, 1,5 - 340 Nm
- E.316D - Electronic torque / angle measuring wrenches, with removable ratchet, 1,5 - 815 Nm
- Electronic adapters
- Manual reset wrenches
- High-torque wrenches
- Production wrenches
- "Low torque" screwdrivers
- "Production" torque screwdrivers
- Electronic torque screwdrivers
- Torque multiplier
- Torque controllers
-
Accessories 9x12mm
- J-S.372 - 3/8" - 1/2" ratchets - drive 9x12
- R-J-S.372V - 1/4" - 3/8" - 1/2 " compact ratchets - drive 9x12
- R-J-S.373 - 1/4" - 3/8" - 1/2" square drive - drive 9x12
- 10 - metric open end bits - drive 9x12, 7 - 19 mm
- 10 - inch open end bits - drive 9x12, 1/4" - 3/4"
- 12 - polygon drives - drive 9x12, 7 - 19 mm
- 12 - inch ring ends - 9x12 end fitting, 1/4" - 3/4"
-
Accessories 14x18 mm
- S.382 - ratchet - drive 14x18, 1/2"
- S-K.382V - compact ratchets - drive 14x18, 1/2" - 3/4"
- S-K.383 - square drive - drive 14x18, 1/2" - 3/4"
- 11 - metric open end bits - drive 14x18, 13 - 32 mm
- 11 - inch open end bits - drive 14x18, 1/2" - 1'1/16"
- 13 - polygon drives - drive 14x18, 13 - 36 mm
- 13 - Inch polygon bits - drive 14x18, 1/2" - 1'1/16"
- Accessories 20x7 mm
- Special accessories
- Set of accessories
-
"Multi-purpose" click wrenches
-
RATCHETS, SOCKETS AND ACCESSORIES
-
1/4"
- Socket sets 1/4"
- R - ratchets 1/4"
- R - socket accessories 1/4"
- R - 1/4" drive metric 6-point sockets, 3,2 - 14 mm
- R - 1/4" drive inch 6-point sockets 3/16" - 9/16"
- Seria R.E - 1/4" drive metric 12-point sockets 5,5 - 14 mm
- R.E - 1/4" drive inch 12-point sockets 3/16" - 9/16"
- R.B - 1/4" drive inch 12-point thin wall sockets 3/16" - 9/16"
- R.LA - 1/4" long-reach metric 6-point sockets 3,2 - 14 mm
- R.EL 1/4" long-reach metric 12-point sockets 4 - 14 mm
- R.EL - 1/4" long-reach inch 12-point sockets 3/16" - 9/16"
- R.HEL - 1/4" long - reach inch 6-point sockets, 1/8" - 9/16"
- R.F - 1/4" drive hinged inch 12-point sockets 3/16" 9/16"
- RTX - 1/4" Torx® sockets E4 - E10
- RT 1/4" drive metric 6-point sockets 2 - 10 mm
- RT 1/4" drive inch 6-point sockets 1/8" - 1/4"
- RX 1/4" drive Torx® bit sockets T6 - T40
- 1/4" drive metric 6-point sockets, ultracompact, 5,5 - 14 mm
- RT.GRP - 1/4" drive metric 6-point OGV® GRIP bit sockets 2 - 10 mm
-
3/8"
- Socket sets 3/8"
- J - ratchets 3/8"
- J - socket accessories 3/8"
- J.H - 3/8" metric 6-point sockets 7 - 24 mm
- J - 3/8" metric 12-point sockets 7 - 24 mm
- J - 3/8" inch 12-point sockets 1/4" - 1"
- JB - 3/8" inch 12-point sockets, 1/4" - 7/8"
- J.HLA - 3/8" long-reach metric 6-point sockets 7 - 24 mm
- J.LA - 3/8" long-reach metric 12-point sockets, 7-24 mm
- JB - 3/8" inch 12-point sockets 1/4" - 1"
- J.F - 3/8" drive hinged inch 12-point sockets, 3/8" - 3/4"
- JTX - 3/8" Torx® sockets E8 - E16
- JT - 3/8" drive metric bit sockets, 3 - 10 mm
- JT - 3/8" drive inch bit sockets 1/8" - 3/8"
- JX - 3/8" Torx® drive sockets, T10 - T55
- JT.GRP - 3/8" drive metric 6-point OGV® GRIP bit sockets 3 - 10 mm
-
3/4"
- Socket sets 3/4"
- K - ratchets 3/4"
- K - socket accessories 3/4"
- K.HB 3/4" drive metric 6-point sockets, 19 - 55 mm
- K.B 3/4" drive metric 12-point sockets, 19 - 55 mm
- K.B 3/4" drive inch 12-point sockets, 3/4" - 2'1/4"
- K.LA 3/4" long-reach metric 6-point sockets, 19 - 42 mm
- KT.A 3/4" drive metric bits for hexagon socket heads, 14 - 22 mm
- 1"
-
Insulated
- R.J.S.151AVSE - 1,000 Volt insulated ratchets, 1/4" - 3/8" - 1/2"
- R.J.S.210-215AVSE - 1000 V insulated extensions, 1/4" - 3/8" - 1/2"
- J.S.121AVSE - 1,000 Volt insulated handles 3/8" - 1/2"
- R.AVSE - 1,000 Volt insulated 6-point 1/4" sockets
- RT.AVSE - 1,000 Volt insulated 6-point 1/4" bit sockets, 4 - 6 mm
- J.AVSE - 1,000 Volt insulated 12-point 3/8" sockets, 8 - 19 mm
- Seria J.LAVSE - 1,000 Volt insulated long 12-point 3/8" sockets, 8 - 19 mm
- S.AVSE - 1,000 Volt insulated 12-point 1/2" sockets, 8 - 22 mm
- S.LAVSE - 1,000 Volt insulated long 12-point 1/2" sockets, 12 - 19 mm
- ST.AVSE - 1,000 Volt insulated male 6-point 1/2" bit sockets, 8 - 17 mm
- 1,000 Volt insulated tool sets
- "Impact" range
-
1/2"
- Socket sets 1/2"
- S - ratchets 1/2"
- S - socket accessories 1/2 "
- S.H - 1/2" metric 6-point sockets 8 - 34 mm
- S.H - 1/2" inch 6-point sockets, 3/8" - 1'1/4"
- S - 1/2" metric 12-point sockets, 8 - 34 mm
- S - 1/2" inch 12-point sockets, 3/8" - 1'1/4"
- S.HLA - 1/2" long-reach metric 6-point sockets 12 - 32 mm
- S.LA - 1/2" long-reach metric 12-point sockets, 12 - 32 mm
- S.LA - 1/2" long-reach inch12-point sockets 1/2" - 1'1/4"
- STX - 1/2" Torx® sockets, E12 - E24
- STM - 1/2" drive metric hexagon bit sockets, 4 - 19 mm
- ST - 1/2" drive inch hexagon bit sockets, 1/4" - 3/4"
- SHP.LA - 1/2" drive long and extra-long reach metric hexagon bit sockets, 6 - 12 mm
- SXM - 1/2" drive Torx® bit sockets, T20 - T60
- SX.LA - 1/2" drive long-reach Torx® bit sockets, T40 - T70
- D.B - Long-reach spline driver sockets, 7 -16 mm
- SV.B - 1/2" drive XZN® spline bit sockets, M6 - M16
- SV.LB - 1/2" drive long-reach XZN® spline bit sockets, M6 - M14
- ST.GRP - 1/2" drive metric 6-point OGV® GRIP bit sockets 5 - 19 mm
-
Non sparking
- Seria SKM.SR - Non sparking 1/2" - 3/4" - 1" ratchets
- S.SR - Non sparking 1/2" metric 12-point sockets, 6 - 32 mm
- S.SR - Non sparking 1/2" inch 12-point sockets, 5/16" - 1'7/16"
- K.SR - Non sparking 3/4" metric 12-point sockets, 17 - 50 mm
- K.SR - Non sparking 3/4" inch 12-point sockets, 3/4" - 2" - 50 mm
- M.SR - Non sparking 1" metric 12-point sockets, 22 - 80 mm
- M.SR - Non sparking 1" inch 12-point sockets, 1'1/16" - 3"
- SKM.120SR - Non sparking 1/2" - 3/4" - 1" sliding tee
- SKM.240SR - Non sparking 1/2" - 3/4" - 1" universal joints
- SKM.SR - Non sparking 1/2" - 3/4" - 1" extensions
- Others
-
1/4"
-
FIXED-SIZE AND AJUSTABLE WRENCHES
-
Combination wrenches
- 440 - Metric combination wrenches 4 - 41mm
- 440 - Inch combination wrenches 1/4" - 1'1/2"
- 39 - Metric short - reach combination wrenches 3,2 - 17 mm
- 39 - Inch short - reach combination wrenches 1'1/16"
- 41 - Metric offset combination wrenches 6 - 32 mm
- 40 .LA - Metric long - reach combination wrenches 19 - 50 mm
- 40.LA - Inch long - reach combination wrenches 3/4" - 2'
- 440.XL - Metric long - reach combination wrenches 8 - 19 mm
- 441 - Metric long - reach combination wrenches 7 - 22 mm
- Combination wrench sets
-
Ratchet wrenches
- 467 - metric standard ratchet combination, 6 - 41 mm
- 467 - inch standard ratchet combination wrenches, 1/4" - 15/16"
- 467BR - metric fast open end combined ratchets, 8 - 19 mm
- 467BF - metric hinged jointed, 7 - 19 mm
- 467F - inch hinged jointed combination wrenches, 5/16" - 3/4"
- 467BS - short metric ratchet, 7 - 17 mm
- 467AS - inch anti slip combination ratchet wrench, 1/4" - 3/4"
- 64 - metric straight ratchet ring wrenches, 6 - 24 mm
- 64 - inch straight ratchet ring wrenches, 15/16"
- 65 - metric 15° hinged ratchet ring, 6 - 24 mm
- 65 - inch 15° hinged ratchet ring 1/4" - 15/16"
- 64C - metric multi - opening straight ratchet ring wrenches, 4 - 19 mm
- 464 - straight ratchet ring wrench opening, 8 - 17 mm
- 467.ADAPT -sockets and bits adaptors
- 464TX - TORX ratchet wrenches
- Ratchet wrench sets
-
Open - end wrenches
- 44 - Metric open end wrenches 3,2 - 55 mm
- 44 - Inch open end wrenches 1/4" - 1'5/8"
- 31 - Metric "extra-slim" end wrenches 6 - 24 mm
- 22 - Metric 15° hinged "midget" open end wrenches 6 - 24 mm
- 22 - Inch 15° hinged "midget" open end wrenches 3/16" - 9/16"
- 34 - Metric 15° and 75° hinged "midget" open end wrenches 3,2 - 17 mm
- 34 - Inch 15° and 75° hinged "midget" open end wrenches 3/16" - 11/16"
- 45 - Power open end wrenches 30 - 75 mm
- Open end wrench sets
-
Ring wrenches
- 55A - Metric offset-ring wrenches 6 - 50 mm
- 55A - Inch offset-ring wrenches 1/" - 1'1/4"
- 59 - Metric straight offset-ring wrenches 6 - 32 mm
- 59L - Metric long double ended ring wrenches 6 - 19mm
- 59L - Inch long double ended ring wrenches 1/4” - 13/16”
- 56A - Inch 10° hinged short-reach ring wrenches, 3/16" - 13/16"
- 56L - Inch 10° hinged long-reach ring wrenches
- 59TX - Straight ring wrenches with Torx® profile - E24
- 57 - Metric half-moon offset-ring wrenches 10 - 22 mm
- 54A - Metric "heavy-duty" offset-ring wrenches 24 - 70 mm
- 54 - Handles for 54A wrenches
- 51B - Metric polygon impact wrenches 24 - 115 mm
- 51B - Inch polygon impact wrenches 1/4" - 4'1/8"
- 51BS - Metric safety slogging wrenches, 24 - 80 mm
- 50.SH - Safety handle for slogging wrenches
- Ring wrench sets
- Variable opening wrenches
-
Angled socket wrenches
- 75 - Forged metric 6 x 6 point angled open-socket wrenches 6 - 38 mm
- 75 - Forged inch 6 x 6 point angled open-socket wrenches 1/4" - 1'
- 76 - Forged metric 12 x 6 point angled open-socket wrenches 6 - 38 mm
- 92A - Metric angled box wrenches 4 - 32 mm
- 160A - Bars for wrenches 91A, 92A and 97
- Angled socket and box wrench sets
-
Socket wrenches
- 74A - Forged socket wrenches with metric screwdriver handle 3,2 - 14 mm
- 98B - Tee socket wrenches with metric slide handle 6 - 17 mm
- 99C - Universal joint tee socket wrenches with metric slide handle 6 - 19 mm
- 66A - Metric hinged combination wrenches 6 - 32mm
- 66A - Inch hinged combination wrenches TORX E6 - E24
- Socket wrench sets
- Flare - nut wrenches
-
Hook and pin wrenches
- 125A - Hinged models 15 - 180 mm
- 115A - Monkey wrenches 10 - 200 mm
- 119 - Heavy-duty hook and pin wrenches 120 - 324
- 126A - Hinged hook and pin wrenches 15 - 180 mm
- 126E - spare hooks for 126A wrenches
- 116 - Sliding-jaw hook and pin wrenches 0 - 200 mm
- 116E - spare hooks for 116 wrenches
- 117B - Wrench for nuts with holes bored on the face 20 - 100 mm
- 117.E - spare hooks for 117.B wrenches
- Wrench for nuts with slot on the face, 20 - 100 mm
- 118.EC - spare hooks for 118A wrenches
-
Combination wrenches
-
KEYS
-
Angled keys
- 83SH - Long metric keys 6-point, spherical head, 1,5 - 12 mm
- 83SH - Long inch keys 6-point, spherical head, 3/32" - 3/8"
- 83S.L - Extra long keys, 6-point, spherical head, 2 - 10 mm
- 83H - Long metric keys, 6-point, 1,5 - 32 mm
- 83H - Long inch keys, 6-point, 0,50" - 9/16"
- 82H - Short metric keys, 6-point, 0,9 - 32 mm
- 82H - Short inch keys, 6-point, 0,28" - 1"
- 83SH.ST - Stainless steel keys - hexagonal, 1,5 - 10 mm
- 89S - Long Torx® keys - spherical head, T15 - T45
- 89 - Short Torx® keys T6 - T55
- 89R - Short Resistorx® keys, T10 - T40
- Angled hexagon key sets
- Seria 80 - hexagon keys for multiple XZN teeth
-
Keys with handle
- 84TZA - Metric hexagon keys, "T" handle, 6-point, 2,5 - 10 mm
- 84TZ - Inch hexagon keys, "T" handle, 6-point, 5/32" - 3/8"
- Seria 84TZSA - klucze trzpieniowe z rękojeścią oprawianą "T", 6-kątne, metryczne, z kulką
- 89TXA - Torx® spinners, "T" handle, T6-T50
- 84TC - Metric hexagon keys, "T" handle, 6-point, 2 - 14 mm
- 84TCD - Tee wrenches with sliding bar, "T" handle, 6-point, 2,5 - 8 mm
- 84TCS - Fast hexagon spinners, "T" handle, 6-point, 4 - 8 mm
- AWHS - Spherical head spinner hexagon keys, PROTWIST handle, 6-point, 2 - 8 mm
- AWHH - Spinner hexagon keys, PROTWIST handle, 6-point, 2 - 8 mm
- Sets of spinner hexagon keys
-
Angled keys
-
SCREWDRIVERS
-
PROTWIST screwdrivers with „tri-coating” tip
- AT - PROTWIST® screwdrivers for slotted head screws - milled blades, 2 - 6,5 mm
- AT - PROTWIST® screwdrivers for slotted head screws - short blades, 4 - 6,5 mm
- ATWH - PROTWIST® screwdrivers for slotted head screws - power series, 5,5 - 14 mm
- ATF - PROTWIST® screwdrivers for slotted head screws - forged blades, 5,5 - 10 mm
- ATP - PROTWIST® screwdrivers for Phillips® screws - round blades, PH0 - PH4
- ATWDH - PROTWIST® screwdrivers for Pozidriv® screws - power series, PZ1 - PZ4
- ATWPH - PROTWIST® screwdrivers for Phillips® screws - power series, PH1 - PH4
- ATP - PROTWIST® screwdrivers for Phillips® screws - short blades, PH1 - PH2
- ATD - PROTWIST® screwdrivers for Pozidriv® screws - round blades, PZ0 - PZ4
- ATD - PROTWIST® screwdrivers for Pozidriv® screws - short blades, PZ1 - PZ2
- ATSQ - PROTWIST® screwdrivers for ROBERTSON square head screws
- ATX - PROTWIST® screwdrivers for Torx® screws, T6 - T40
- ATXP - PROTWIST® screwdrivers for Torx Plus® screws, IP5 - IP40
- ATXR - PROTWIST® screwdrivers for Resistorx® screws, TT10 - TT40
- ATXRP - PROTWIST® screwdrivers for Torx Plus® screws, IPR10 - IPR40
- Sets of PROTWIST® screwdrivers with „tri-coating” tip
-
PROTWIST INOX stainless steel screwdrivers
- AT.ST - ATF.ST - PROTWIST® stainless steel screwdrivers for slotted head screws 4 - 8mm
- ATP.ST - PROTWIST® stainless steel screwdrivers for Phillips® screws PH1 - PH2
- ATD.ST - PROTWIST® stainless steel screwdrivers for Pozidriv® screws PZ1 - PZ2
- ATX.ST - PROTWIST® stainless steel for Torx® screws, T10 - T40
- Sets of PROTWIST INOX screwdrivers
- Wkrętak elektryczny E-PROTWIST 4V
- PROTWIST SHOCK screwdrivers
-
PROTWIST FLUO fluorescent screwdrivers
- AN.F - PROTWIST® screwdrivers for slotted head screws - FLUO 2,5 - 6mm
- AW.F - PROTWIST® screwdrivers for slotted head screws - hexagonal blades - FLUO 8 - 10 mm
- AN.P - PROTWIST® screwdrivers for Phillips® screws - FLUO PH0 - PH4
- AWP.F - PROTWIST® screwdrivers for Phillips® screws - hexagonal blades - FLUO PH2
- AWHS.F - Spherical head spinner hexagon keys - FLUO 3 - 5 mm
- Bit and socket holders - FLUO
- Sets of FLUO screwdrivers
-
ISORYL screwdrivers
- AR - ISORYL screwdrivers for slotted-head screws - milled blade 2 - 8 mm
- ARA - ISORYL screwdrivers for slotted-head screws - handle with clasp 2,5 - 3,5 mm
- AGT - ISORYL screwdrivers for slotted-head screws - forged blade - T handle 2,5 - 3,5 mm
- ARB - ISORYL screwdrivers for slotted-head screws - short blade 4 - 6,5 mm
- AD - ISORYL screwdrivers for Pozidriv® screws PZ0 - PZ3
- ADB - ISORYL screwdrivers for Pozidriv® screws - short blade PZ1 - PZ2
- AP - ISORYL screwdrivers for Phillips® screws PH0 - PH4
- APB - ISORYL screwdrivers for Phillips® screws - short blade PH0 - PH2
- Sets of ISORYL screwdrivers
-
PROTWIST 1,000 Volt insulated screwdrivers
- AT.VE - PROTWIST® 1,000 Volt insulated screwdrivers for slotted-head screws, 2 - 12 mm
- ATP.VE - PROTWIST® 1,000 Volt insulated screwdrivers for Phillips® head screws PH0 - PH4
- ATD.VE - PROTWIST® 1,000 Volt insulated screwdrivers for Pozidriv® head screws, PZ0 - PZ3
- AT.TVE - insulated screwdrivers with a slim tip, 3.5 - 6.5 mm, PH1 - PH2, PZ1 - PZ2
- Insulated screwdriver sets
-
Wood handle screwdrivers
- ATH - Wood handle screwdrivers for slotted head screws - forged blade 5,5 - 12 mm
- ATHH - Wood handle screwdrivers for slotted head screws - hexagonal forged blade 4 - 14 mm
- ATHH.P - Wood handle screwdrivers for Phillips® screws - hexagonal blade PH1 - PH3
- ATHH.D - Wood handle screwdrivers for Pozidriv® screws - hexagonal blade PZ1 - PZ3
- Sets of wood handle screwdrivers
- Multiblade screwdrivers
- Bit - holding screwdrivers
- Voltage - tester screwdrivers
- Magnetisers
- Screw holders
- Angled screwdrivers
-
PROTWIST screwdrivers with „tri-coating” tip
-
PLIERS
- Multigrip pliers
- Combination pliers
- Flat-nose pliers
- Round and half - round nose pliers
- Diagonal cutters
- End cutters
- Wire stripper
- Inside Circlip pliers
- Outside Circlips pliers
- Removable tip pliers
- Snap-ring pliers
- Locking-wire pliers
- Lock-grip pliers
- End nippers
- Plastics cutters
- "Connector" pliers
- Plier sets
-
BITS
-
Series 0 - 4mm drive, standard
- ES.0 - Screw bits for slotted head screws 1,8 - 4,5 mm
- EP.0 - Screw bits for Phillips® screws PH00 - PH0
- ED.0 - Screw bits for Pozidriv® screws, PZ00 - PZ1
- EH.0 - Screw bits for countersunk hex head screws 0,9 - 2,5 mm
- ETS.0 - Screw bits for countersunk hex spherical head screws 1,5 - 2,5 mm
- EX.0 - Screw bits for Torx® screws T6 - T10
- Socket holder bit 4mm - 1/4"
-
Series 1 - 1/4" - 6,35 mm drive, standard
- ES.1 - Standard bits series 1 for slotted head screws 3 mm
- EP.1 - Standard bits series 1 for Phillips® screws PH0 - PH2
- ED.1 - Standard bits series 1 for Pozidriv® screws PZ0 - PZ2
- ECAR.1 - Standard bits series 1 for ROBERTSON square head screws 1 - 3
- EX.1 - Standard bits series 1 for Torx® screws T6 - T40
- EXP.1 - Standard bits series 1 for Torx Plus® screws IP6 - IP40
- EXR.1 - Standard bits series 1 for Resistorx® screws TT10 - TT40
- EXP.1 - Standard bits series 1 for Tamper Resistant Torx Plus® screws IPR8 - IPR40
- ETS.1 - Standard bits series 1 with spherical head for countersunk hex screws 2,5 - 6 mm
- EH.1 - Screw bits series 1 for metric countersunk hex head screws 1,5 - 10 mm
- EH.1 - Screw bits series 1 for inch countersunk hex head screws 1/8"- 1/4"
- EV.1 - Standard bits series 1 for XZN multiple teeth head screws M4 - M10
- ETRI.1 - Standard bits series 1 for Tri-wing head screws 1 - 5
- EBNA.1 - Standard bits series 1 for BNAE head screws 4 - 6
- ETOR - Standard bits series 1 for Torq Set® head screws 0 - 10
- Sets of standard series 1 bits - 1/4" - 6.35 mm drive
- Series 1 - 1/4" - 6,35 mm drive, 'High Perf'
- Bit holders and accessories
-
Series 1 - 1/4" - 6.35 mm drive, Flextorq impact
- ENS.1 Flextorq Impact bits series 1 for slotted head screws 5.5
- ENP.1 Flextorq Impact bits series 1 for Phillips® screws PH1 - PH3
- END.1 Flextorq Impact bits series 1 for Pozidriv® screws PZ1 - PZ3
- ENX.1 Flextorq Impact bits for Torxs® screws T10 - T40
- ENH.1 Flextorq Impact bits series 1 for hex screws 3 - 10 mm
- Sets of Flextorq Impact bits 1/4" - 6,35 mm drive
-
Series 1 - 1/4" - 6,35 mm drive, 'High Perf' titanium
- ES.12T - High Perf' Titanium bits series 1 for slotted head screws 4,5 - 8 mm
- EP.13T - High Perf' Titanium bits series 1 for Phillips® screws PH1 - PH3
- ED.13T - High Perf' Titanium bits series 1 for Pozidriv® screws PZ1 - PZ3
- Sets of high power Titanium series 1 bits - 1/4" - 6.35 mm drive 1/4" - 6,35 mm
-
Series 2 - 5/16" - 7,94 mm drive, standard
- ES.2 - Standard bits series 2 for slotted head screws 6,5 - 12 mm
- EP.2 - Standard bits series 2 for Phillips® screws PH1 - PH4
- ED.2 - Standard bits series 2 for Pozidriv® screws PZ1 - PZ4
- EX.2 - Standard bits series 2 for Torx® screws T20 - T50
- EH.2 - Standard bits series 2 for countersunk hex screws 4 - 10 mm
- Standard bits series 2 for countersunk hex screws 1/4"- 3/8"
- EH.2L - Standard long bits series 2 for countersunk hex screws 4 - 10 mm
- EV.2 - Standard bits series 2 for XZN multiple teeth head screws XZN M6 - M12
- EV.2L - Standard long bits series 2 for XZN multiple teeth head screws M5 - M10
- ETORM.2 - Standard bits series 2 for Torq Set® head screw 8 - 10, 1/4 - 3/8
- EBNA.2 - Standard bits series 2 for BNAE head screws 4 - 8
-
Series 2 - 5/16" - 7,94 mm drive, impact
- ENS.2 - Impact bits series 2 for slotted head screws 5,5 - 14 mm
- ENP.2 - Impact bits series 2 for Phillips® screws PH1 - PH4
- END.2 - Impact bits series 2 for Pozidriv® screws PZ1 - PZ4
- ENH.2 - Impact bits series 2 for hex countersunk screws 4 - 10 mm
- ENX.2 - Impact bits series 2 for Torx® screws T20 - T55
- Impact screwdrivers
- Sets of impact bits
-
Series 3 - 1/2" - 12,7 mm drive, impact
- ENS.3 - Impact bits series 3 for slotted head screws 12 - 16 mm
- ENH.3 - Impact bits series 3 for metric hex countersunk screws 3 - 19 mm
- ENH.3 - Impact bits series 3 for inch hex countersunk screws 1/2" - 7/16"
- NEX - Impact bits series 3 for Torx® screws T25 - T70
- Impact screwdrivers
- Sets of impact bits
-
Series 6 - 1/4" - 6,35 mm grooved drive, standard
- ES.6 - Standard bits series 6 for slotted head screws 3 - 5,5 mm
- EP.6 - Standard bits series 6 for Phillips® screws PH1 - PH3
- ED.6 - Standard bits series 6 for Pozidriv® screws PZ1 - PZ3
- EX.6 - Standard bits series 6 for Torx® screws T10 - T40
- EH.6 - standard bits series 6 for countersunk hex screws, 3 - 8 mm
- ECAR.6 - standard bits series 6 for robertson square head screws, 1 - 3
- ETORM.6 - standard bits series 6 for TORQ SET head screws 2 - 10, 1/4
- EF.6DM - magnetic sockets for hex screws, 5,5 - 13 mm
- EF.6D - sockets for hex screws, 5,5 - 13 mm
- Sets of 3 standard bits series, drive 1/4" - 6,35 mm
- Series 6 - 1/4" - 6,35 mm grooved drive, 'High Perf'
- Series 6 - 1/4" - 6,35 mm grooved drive, 'High Perf' titanium
-
Series 0 - 4mm drive, standard
-
METROLOGY, MEASURING
- Calipers
- Depth gauges
- Micrometers
- Comparators
- Laser distance meters
- Dial gauges
- Surface gauges
- Metrology sets
- Rulers
- Tape measures
- Folding rules
- Levels
- Surface plates and V-blocks
- Squares
- Bevel protractors
- Feeler gauges and gauges
- Marking-out tools
- Marking-out
- Sounding leads and sounding line gauges
- Accesories
-
HAMMERS, IMPACT TOOLS
-
Hammers
- 200C - graphite handle riveting engineers hammer, 0,3 - 2,8 kg
- 200H - riveting engineers hammers, 0,3 - 2,8 kg
- 205C - graphite handle din engineers hammer, 0,2 - 1,1 kg
- 205H - din engineers hammers, 0.25 - 1.2 kg
- 202H - ball head engineers hammers, 0,1 - 1,1 kg
- 860H - dinging hammers, round face, 0,3 - 0,9 kg
- 859H - dinging hammer, square face, 0,6 kg
- 213H - welders chipping hammers, 0,3 - 0,5 kg
- 203H - electricians hammer, 0,16 - 0,2 kg
- 215H - joiners hammers, 0,2 - 0,4 kg
- 204 - carpenters hammer, 0,8 kg
- 1262H - beveled edge club hammers, 1 - 1,5 kg
- 1263H - high load club hammer, 4,8 kg
- 209 - wooden mallets, 0,3 - 0,5 kg
- Wooden handles
- Soft face hammers
- Drifts
-
Nail-sets
- 249G - sheathed drift punches, 2 - 16 mm
- 247G - sheathed nail sets, 2 - 8 mm
- 249 - standard drift punches, 2 - 10 mm
- 248 - one-piece drift punches, 2 - 10 mm
- 246 - drift punches for spring pins, 2 - 8 mm
- 251A - precision sleeved drift punches, 1 - 6 mm
- 247 - nail sets, 2 - 8 mm
- 217.GJ1 - drifts set - 3 materials: brass-polyamide-aluminum
- Impact tools set
- Centre punches
-
Flat chisels - Cape chisels
- 263.G - sheathed chisels, 15 - 25 mm
- 263 - slim chisels, 21 - 27 mm
- 259 - slim-profile chisels, 26 mm
- 263P - chisels with guard, 27 mm
- 259.P - slim-profile chisel with guard, 26 mm
- 260.P - wide chisel with guard, 60 mm
- 262A - ribbed chisels, round head, 21 - 29 mm
- 265 - cape chisels, 8 - 10 mm
- Zestawy przecinaków i przebijaków
- Sets and modules
-
Hammers
-
SAWING, DRILLING, CUTTING
-
Sawing
- 603F- "high performance" hacksaw frame, 8 blade positions
- 601 - compact hacksaw frame, 2 blade positions
- MOD.601 - saw, measuring, file module
- 606A - straight frame with blade backing
- 605.B - revolver frame with sliding blade-guide
- 599 - flat bow frame - adjuster fitting
- 668B - cobalt steel bimetal saw blades, 300 mm
- 666 - bi-metal blades universal, 395 mm
- Files
- Drill bits
- Taps and dies
- Holesaws
- Mills
- Scrapers
- Metal shears
- Bolt croppers
- Punch kit
- Cable cutters
-
Knives
- 844.D - safety knife with retractable blade
- 844.R - retractable utility knife with interchangeable blades
- 844.S - cutters with snap-off blades
- Seria 844 - spare blades for 844 knives
- 840LE - thumbwheel knife
- 840.4A - lock-back knife
- 840.F - lock-back knife with bi-material handle
- 640180 - twin-blade electricians knife with plastic handle
- 843 - twin-blade electricians knife with wood handle
- 840B - electricians knife with wire stripper
- 840.1 - Electricians knife with wire stripper with wood handle
- Scissors
-
Sawing
-
PULLERS
-
Mechanical 3 - leg pullers
- U.306 - outside pullers 4t, 7-260 mm
- U.306N - Inside pullers 4t, 23-170 mm
- U.310 - outside pullers 10t, 12-250 mm
- U.310N - inside pullers 10t, 50-230 mm
- U.302 - inside pullers with slim legs 2,4t, 17-200 mm
- U.20 - reversible universal 2-leg pullers, 25-170 mm
- U.20B - long-reach leg outside puller 7t, 25-260 mm
- U.27AS3 - wide spread grip puller 6t, 30-800 mm
- U.320 - high-capacity 20t outside puller, 100-360 mm
- U.330 - 30t hydraulic outside puller, 100-530 mm
- Inside/outside puller kits
- Hydraulic 3 - leg pullers
-
Mechanical 2 - leg pullers
- U.32T - lockable 2-leg sliding-leg pullers 2-15t, 20-470 mm
- U.232 - 2-leg sliding-leg pullers 15-50t, 30-346 mm
- U.14 - Self-gripping outside pullers with slim legs 0,5t, 10-45 mm
- U.301 - self-gripping outside pullers with slim legs 9-13t, 10-200 mm
- U.301LMP - self-gripping outside pullers with wide legs 0,9-1,3t, 15-110 mm
- U.35 - pullers with outside wide legs 1-3t, 10-75 mm
- U.34 - high-capacity wide leg outside puller 7t, 40-180 mm
- U.42 - pullers with yoke 1,5t, 10-85 mm
- U.52 - high-capacity pullers with yoke 6t, 10-150 mm
-
Special grip bearing pullers
- U.23J - tip-type pullers, cage grip
- U.23D - set of 2 tips
- U.51B - tip-type pullers, inside grip, 32-70 mm
- U.28 - tip-type pullers, large spread inside grip, 70-160 mm
- U.30 - beam for pullers U.28 and U.51B
- U.40 - beam for pullers U.51B and U.306
- U.49PJ- spreader-type pullers, inside grip, 8,5-60 mm
- U.49P - clamps for inside grip
- Adaptor tip for clamps and slide hammers
- Slide hammers
- Separators and beam pullers
-
Stud extractors
- Seria 285 - unit stud pullers, right-hand pitch
- 285.J - single tapered drill bits for pullers 285
- 285.J - set of stud pullers, right-hand pitch
- 885 - drill bits and pullers for stud pulling, right or left-hand pitch
- 885 - set of stud pullers, right or left-hand pitch
- 286A - roller-type stud drivers - multi-diameter, 5-27 mm
- 287B - roller-type stud drivers - single-diameter, 6-16 mm
- 287B.JS5 - set of roller-type stud drivers, 6-10 mm
- SXE - stud extractors OGV GRIP, 2.5 - 9 mm
- SXE.J7MGRPPB - set of stud extractors OGV GRIP, 2.5 - 9 mm
- Nut splitters
- Puller sets
- Spare parts and accessories
-
Mechanical 3 - leg pullers
- LIGHTING
-
PNEUMATIC TOOLS
- CORDLESS TOOLS
- PERSONAL EQUIPMENT, MAINTENANCE
-
PIPEWORK TOOLS, VICES AND CLAMPS
-
Pipe wrenches
- 131A - steel stillson models, capacity: 0 to 102 mm
- 134A - cast-iron american model pipe wrenches, capacity: 0 to 140 mm
- 135A - light alloy 90° offset american model pipe wrenches, capacity: 0 to 76 mm
- 133A - light alloy 90° offset american model pipe wrenches, apacity: 0 to 140 mm
- 120A - "swedish" model wrench - 45°, capacity: 10 to 60 mm
- 121A - "swedish" model wrench - "s" jaws - 45°, capacity: 10 to 60 mm
- 136A - double effect chain wrench, capacity: 60 to 140 mm
- 137A - high power chain wrench, capacity: 50 to 180 mm
- 138A - nylon strap wrenches, capacity: 0 to 165 mm
- Chains and strap wrenches
- Benders
- Pipe cutters
- Tools for deburring-chamfering pipes
- Clamp tools
- Riveting pliers
- Vices
- Assembly presses
- Clamps
-
Pipe wrenches
-
NON-SPARKING TOOLS
-
ADF wrenches
- 440.SR - non sparking metric combination wrenches, 6 - 70 mm
- 440.SR - non sparking inch combination wrenches, 1/4" - 1'3/8"
- 113A.SR - non sparking adjustable wrenches, 18 - 55 mm
- 50.SR - non sparking metric impact ring wrenches, 17 - 150 mm
- 50.SR - non sparking inch impact ring wrenches, 11/16" - 4'1/8"
- 49.SR - non sparking metric impact open end wrenches, 17 - 150 mm
- 75.SR - non sparking metric angled socket wrenches, 6 - 41 mm
- ADF pliers
-
ADF ratchets, sockets
- SKM.SR - non sparking ratchets, 1/2" - 3/4" - 1"
- S.SR - non sparking 1/2" inch 12-point sockets, 6 - 32 mm
- S.SR - non sparking 1/2" inch 12-point sockets, 5/16" - 1'7/16"
- K.SR - non sparking 3/4" metric 12-point sockets, 17 - 50 mm
- K.SR - non sparking 3/4" inch 12-point sockets, 3/4" - 2"
- M.SR - non sparking 1" metric 12-point sockets, 22 - 80 mm
- SKM.120SR - non sparking 1/2" - 3/4" - 1" sliding tee
- SKM.240SR - non sparking 1/2" - 3/4" - 1" universal joints
- SKM.SR - non sparking 1/2" - 3/4" - 1" extensions
- ADF screwdrivers
- ADF hexagon keys
- ADF impact tools
- ADF cutting tools
- ADF pipe wrenches
-
ADF wrenches
-
ELECTRICITY
- Cable-sheath strippers
- Crimping pliers
- Crimping dies for crimping pliers
- Wiring tools
- Wire puller tools
-
Hole punches with PG/ISO circular cutout
- 985968-95 - punches for PG size holes with actuating screw, PG7 - PG 29
- 985734-933 - punches and dies for PG size holes without screw, PG7 - PG48
- 693716-7653 - punches for ISO size holes with actuating screw, M12 - M63
- 693708-664544 - punches for ISO size holes without actuating screw, M12 - M63
- 697469-531 - punches - ISO Plus dies for stainless steel plate, M16 - M63
- Physical measurement
- 1,000 V insulated pliers
-
1,000 V insulated screwdrivers
- A.VE - PROTWIST® 1,000 Volt insulated screwdrivers for slotted-head screws, 2 - 12 mm
- AP.VE - insulated screwdrivers for PHILLIPS® head screws, PH0 - PH4
- AD.VE - insulated screwdrivers for POZIDRIV® head screws, PZ0 - PZ3
- A.TVE - insulated screwdrivers with a slim tip, 3.5 - 6.5 mm, PH1 - PH2, PZ1 - PZ2
- AX.VE - Insulated screwdrivers for TORX screws, T10 - T30
- Insulated screwdriver sets
-
1,000 V insulated tools with safety code
- Narzędzia nasadowe izolowane 1000 V, seria VSE
- VSE 1000 Volt series insulated pliers
- 46.AVSE - VSE series 1000 Volt insulated open end wrenches, 8 - 21 mm
- 55.AVSE - VSE series 1000 Volt insulated offset ring wrenches, 8 - 21 mm
- 113.AVSE - VSE series 1000 Volt insulated adjustable wrenches, 27 - 44 mm
- 83.AVSE - VSE series 1000 Volt insulated keys, 3 - 12 mm
- 1820.AVSE - VSE series 1000 Volt insulated knife
- 602.AVSE - VSE series 1000 Volt insulated hacksaw frame
- Safety gloves and insulated mats
- Insulated tool sets
-
ELECTRONICS
- Micro - Tech electronic pliers
- Electronic pliers antistatic series
-
Micro-Tech screwdrivers
- AEF-AEP - Micro-Tech® replaceable blade screwdriver for slotted head screw, 1 - 2,5 mm
- AEF - Micro-Tech® screwdriver for slotted head screw, 1,5 - 4 mm
- AEFP - AEFD - Micro-Tech® screwdriver for Phillips® PH000 - PH1 and Pozidriv® pattern PZ0 - PZ1
- AEX - Micro-Tech® screwdriver for Torx® screw, T5 - T20
- 84E - Micro-Tech® screwdriver for male hex screws, 0,9 - 2,5 mm
- AEM.M - Micro-Tech® bit holder screwdriver for hex screws, 4 mm
- Standard bits series 0 - drive 4 mm
- Micro-Tech® screwdriver kits
- Tweezers
-
Soldering tools
- 1003B.E - anti-static digital welder 68 watts
- 1003B.68E - electronic soldering iron, 68 W
- 1230B - 230 volt electronic soldering irons, 15 - 25 W
- BV.21-10 - soldering iron stand
- 1116B.BW - bi-watt iron 20-40 for electronic
- 848B.100 - instant-heat 100 W - 230 V soldering iron
- 947A - high power irons - 230 V, 50 - 400 W
- 1075.H - gas soldering iron, 75 W
- 839 - desoldering pumps
- 1130.1 - desoldering braid, 1,6 m
- Accesorries for electronics
-
AUTOMOTIVE
-
General workshop equipment
- Mobile lifting equipment, 1,5 - 3,2 t
- DL.3 - axle stands 2,2 t
- Workshop cranes, 0,5 - 1 t
- Headlight beam adjusters
- Device removal jack, 300 kg - 1200 kg
- DL.20SUP - lifting plate
- W.410-450 - hydraulic presses, 10 - 50 t
- DTS.B - inspection creepers
- DTS.4A - mid-height work seat
- CR.D2 - non-magnetic wing cover with suction fasteners
- D.3 - pry bars, 292 - 915 mm
- DL.BTI - heavy duty series bottle jacks
- DL.BTA - standard series bottle jacks
- CR.S20 - stopień warsztatowy
- Hydropneumatic jacks
- Akcesoria
- DL.R - Hydraulic wheel lift
- Electric and hybrid vehicles support
-
Oil change - filtration
- D.48-KIT - oil change kit
- D.48 - hinged oil drain wrench
- MB-J15 - set of magnetic oil drain bits and sockets on rack
- DM.B47 - maintenance tools for the engine lubrication system
- D.106-120 - gearbox and differential drain plug bits
- D.106-120 - drain plug wrenches
- D.1VAG-B - drain-plug wrenches and bits
- OD.80G - Zlewarka do oleju
- Oil-filter wrenches
- Cap wrenches
- Filter pliers
- Akcesoria
-
Spark plug tools
- B.J - 3/8" sockets for spark plugs, 14 - 21 mm
- Seria B.S - 1/2" sockets for spark plugs, 16 - 21 mm
- B.JR - 3/8" hinged wrenches for spark plugs, 16 - 21 mm
- L.16-21 - box wrenches for spark plugs, 16 - 21 mm
- DM.28 - spark plug lead pliers
- 804 - feeler gauges
- Spark plug accessories
- B.1R - 3/8" hinged wrenches for glow plugs, 8 - 12 mm
- DCR - tools for removing damaged glow plugs
- DX.10A - glow plug tester
- Glow plug sets
- Auto electrics support
-
Engine support
- Engine compression testers
- Pressure control accessories
- Diesel dummy glow plugs and injectors
- Common rail injector tools
- Glow plug tools
- Injector tools
- Cooling circuit tools
- Cylinder head - valves
- Torque control
- Thread repair tools
- DA.160 - manual pressure/vacuum pump
- DM.FR2 - diesel filter fitting and removal tool
- DM.J - fuel gauge wrench
- DM.C - clamp pliers
- DM.F - fast fit fuel pliers
- DM.MUB - spring clamp pliers
- DE.C - PSA exhaust collar pliers
- DM.33-34 - hose clamps
- 751 - piston ring pliers
- DM.90-91 - screw-type hose clamps
- 750.B - piston ring compressors
- X.730B - digital stroboscopic lamp for gasoline engines
- DM.TU - hose removal pliers
- DM.25-29 - self-tightening clamp pliers
- D.133C - flexible nut drivers (6 point), 6 - 10 mm
- D.145-6A - lambda probe wrench and sockets
- 217 - master bearing race and seal drivers, 9,5 - 90 mm
- 804 - feeler gauges
- D.110 - spark plug fitter
- AR - tools for gripping
- Valve timing support
-
Brakes support
- DX.TSCANPB - diagnosis of brake disc & tyres
- DF.18-01 - disc brake vernier caliper
- DF.19-01 - drum brake vernier caliper
- DF.16 - brake fluid tester
- DF.21 - adjustable-pressure electronic brake bleeder
- DF.20-12A - universal plug for bleeding brakes and clutches of LCV's and HGV's
- DF.20-07 - aluminium brake bleeder plug
- DF.17 - pneumatic piston pushing tool
- MOD.DFD - disc brake module
- DF.3 - wire brush
- DF.2 - hand-brake pliers
- 196.S - brake-spring pliers
- D.79A - hand-brake pliers
- D.104B - steady-spring tool
- MOD.DFT - drum brake servicing module
- DF.475A - flange press SAE/DIN
- DF.23 - brake calliper piston pusher
- Gearbox and clutch support
- Suspension support
-
Wheels and steering support
- MOD.208 - wheel nut tightening module, 40 -200 Nm
- 77A - cross braces, 17 - 32 mm
- U.179A - air-line connector and gauge, 0 - 12 bar
- NS - impact wrenches 1/2"
- NSAL.3 - set of long-reach thin wall sockets for alloy wheels, 17 - 21 mm
- N.709 - air hose reel
- D.93 - valve core remover
- D.3 - tyre-remover, 30 - 60 cm
- U.16 - ball joint pullers, 16 - 45 mm
- D.138 - lower ball-joint socket
- U.7 - steering ball joint separator
- D.143B - socket for angular tightening of the hub nut
- DM.14 - transmission collar clamp
- NM - sockets for hubs
- NS.MB - nasadka udarowa do nakrętek w kołach Mercedes
- DR.SIL - Silent valve core remover
- Hub pullers
-
Bodyworks support
- Supports
- Stripping tools
- Air tools - bodywork
- Chisels
- 229A - boring bits, 3 - 30,5 mm
- 229A.ST - stepped bits, 4 - 38 mm
- VFA - filing burrs
- 225.J - end mills, 6 - 10 mm
- 230 - welding spot mill
- 270A.MA - steel wire brush
- 245.J1 - "Standard" kit for making round gaskets
- 235.J1 - set of 3 stainless steel scrapers
- 237.J1 - set of 3 flexible wide scrapers, 32, 50, 75 mm
- CR.PGC - gap controller
- Bodywork repair workstation
- Panel beating hammers
- Dollies and spoons
- Sanding wedges
- 851B - frame for milled files
- 850 - milled files
- CAD.9-10 - hand punch
- Forming tool sets
- MOD.CAR - bodywork modules
- Preparation workstations and painters support
- Windshield tools
- Dent removal
- Hydraulic equipment
- 518A - vice pliers for bodywork
-
General workshop equipment
-
HEAVY GOODS AND INDUSTRIAL VEHICLES
-
AEROSPACE
- PROTO wrenches
- PROTO socket tools
-
Crowfoot bits
- J.R - 12-point 3/8" drive adaptors
- J.CF – 3/8" inch crowfoot open end bits, 3/8"- 3'
- J.CF – 3/8" metric crowfoot open end bits, 8 - 32 mm
- J.FL - 3/8" inch crowfoot box end bits, 5/8" - 1'1/16"
- R.CF - 1/4" inch crowfoot open end bits, 1/4" - 9/16"
- R.CF – 1/4" metric crowfoot end bits, 7 - 14 mm
- Sets of Crowfoot bits
- Torq Set bits
- Tri - wing bits
- Locking - wire pliers
- Foam modules - "control system"
-
SLS TOOLING
- SPARE PARTS
227.8X125T2 - Standard taps, 8 x 1.25 mm (2 pcs.)
- Symbol: 227.8X125T2
- EAN: 3148511538500
-
Facom
• d1: 8 mm
• d: 6.3 mm
• L: 72 mm
• L1: 1.25 mm
• Weight: 60 g
12 months for all manufacturing flaws and faults
Lead time:
approx. 10 weeks
139.77 zł
125.79 zł
net
(154.72 zł gross)
The lowest price of the product in last 30 days: 125,79 zł
• HSS steel.
• 227.T2: Set of 2 taps (taper and bottoming).
• Standards: NF ISO 529, NFEN 22857, ISO 529, ISO 2857.
- Symbol: 227.8X125T2
- Size: M8
- L [mm]: 72.00
- D: 6.30
- Typ: gwintownik HSS
- Ilość elementów: 2
Zapytaj o produkt
227.8X125T2 - Standard taps, 8 x 1.25 mm (2 pcs.)
*fields required