Please be advised that in order to optimize the content available on our website, to adapt them to your individual needs, we use information saved using cookies on end users' devices. Cookie files can be controlled by the user using the settings of your web browser. By continuing to use our website without changing your browser settings, you accept the use of cookies. Read more: Privacy policy.
English
- English
- Polski
Cart: 0 Product Products (empty)
Clear cart
No products
Free shipping! Shipping
500,00 zł Amount to obtain free shipping:
Prices are tax excluded
0,00 zł Total
Prices are tax excluded
- Specials
- Prices drop
- Sale
- Tool gifts
PRODUCTS OF THE WEEK:
- Bestsellers
- Information
PROFESSIONAL TOOLS
KRAKÓW
Przemysłowa 12
tel (12) 415 80 81
krakow@im-narzedzia.pl
CHORZÓW
Młodzieżowa 17
tel (32) 241 20 20
chorzow@im-narzedzia.pl
JOIN US:
- Services
- 5S system
- foam trays tool control
- marking
- signatures
- Service
- repairs
- calibration
- warranty service
- Professional support
- selection of tools
- individual projects
- presentations, demo cars
PROFESSIONAL TOOLS
KRAKÓW
Przemysłowa 12
tel (12) 415 80 81
krakow@im-narzedzia.pl
CHORZÓW
Młodzieżowa 17
tel (32) 241 20 20
chorzow@im-narzedzia.pl
JOIN US:
Facom
SPOTLIGHTJET8M - WORKSHOP TROLLEY9 490,00 zł 5 021,10 zł (tax excl.)Add to cart6 175,95 zł (tax incl.)
11 672,70 zł 5 021,10 zł (tax excl.)6 175,95 zł(tax incl.)
199,00 zł (tax excl.)244,77 zł(tax incl.)
Subcategories
1224 - worksite-maintenance 360° swivel vices
• Vices in spheroid graphite cast iron, tensile strength 700 N/mm² minimum.• Wide bearing base of the prism guide/mobile jaw: lack of guide flexion, vice operation preserved even under heavy loads.• Interchangeable parallel jaws. High wear resistance, hardness 48/53 HRc.• Removable V-shaped jaws for tightening the pipes. Hardness 40/46 HRc.• Adjustment system by 2 complex gap compensation screws.• Burnished control bar.
1224.E - worksite-maintenance fixed vices
• Vices in spheroid graphite cast iron, tensile strength 700 N/mm² minimum.• Wide bearing base of the prism guide/mobile jaw: lack of guide flexion, vice operation preserved even under heavy loads.• Interchangeable parallel jaws. High wear resistance, hardness 48/53 HRc.• Removable V-shaped jaws for tightening the pipes. Hardness 40/46 HRc.• Adjustment system by 2 complex gap compensation screws.• Burnished control bar.
283 - pipe vices
• Base, arcade, clamp and slider in soft cast iron.• Screws in square thread semi-hard drawn steel.• Hardened steel offset jaws.
Products
Vices There are 19 products.
Showing 1 - 19 of 19 items
Categories
( products)- Tools sets
- Roller cabinets and workshop furniture
- Toolboxes, cases and chests
- Fabric toolboxes
- Organiser
- Plastic toolboxes
- Metal toolboxes
- Service cases
- BV.51A - polypropylene cases, 5 partitions, 486 x 430 x 205 mm
- Seria BV.FC - walizki szczelne
- BV.21 - polipropylene cases with sealed partitions, 530 x 390 x 180 mm
- BV.C - accessories for BV cases
- BV.61 - roller case with trolley system, 550 x 440 x 365 mm
- BV.21TR1 - roller case with trolley system, 530 x 390 x 180 mm
- BV.7A - leather fold - down front case, with partitions
- BV.5A - leather suitcases
- BV.16 - soft case, 440 x 315 x 75 mm
- BS.12 - soft case, 4 flaps, 430 x 320 x 130 mm
- BS.R20 - Rolling soft bag, 550 x 360 x 440 mm
- Leather cases
- "Light maintenance" roll bags
- Toolmat
- Fixed-size and adjustable wrenches
- Combination wrenches
- 440 - Metric combination wrenches 4 - 41mm
- 440 - Inch combination wrenches 1/4" - 1'1/2"
- 39 - Metric short - reach combination wrenches 3,2 - 17 mm
- 39 - Inch short - reach combination wrenches 1'1/16"
- 41 - Metric offset combination wrenches 6 - 32 mm
- 40 .LA - Metric long - reach combination wrenches 19 - 50 mm
- 40.LA - Inch long - reach combination wrenches 3/4" - 2'
- Combination wrench sets
- Ratchet wrenches
- 467 - metric standard ratchet combination, 6 - 41 mm
- 467 - inch standard ratchet combination wrenches, 1/4" - 15/16"
- 467BR - metric fast open end combined ratchets, 8 - 19 mm
- 467BF - metric hinged jointed, 7 - 19 mm
- 467F - inch hinged jointed combination wrenches, 5/16" - 3/4"
- 467BS - short metric ratchet, 7 - 17 mm
- 467AS - inch anti slip combination ratchet wrench, 1/4" - 3/4"
- 64 - metric straight ratchet ring wrenches, 6 - 24 mm
- 64 - inch straight ratchet ring wrenches, 15/16"
- 65 - metric 15° hinged ratchet ring, 6 - 24 mm
- 65 - inch 15° hinged ratchet ring 1/4" - 15/16"
- 64C - metric multi - opening straight ratchet ring wrenches, 4 - 19 mm
- 464 - straight ratchet ring wrench opening, 8 - 17 mm
- 467.ADAPT -sockets and bits adaptors
- 464TX - TORX ratchet wrenches
- Ratchet wrench sets
- Open - end wrenches
- 44 - Metric open end wrenches 3,2 - 55 mm
- 44 - Inch open end wrenches 1/4" - 1'5/8"
- 31 - Metric "extra-slim" end wrenches 6 - 24 mm
- 22 - Metric 15° hinged "midget" open end wrenches 6 - 24 mm
- 22 - Inch 15° hinged "midget" open end wrenches 3/16" - 9/16"
- 34 - Metric 15° and 75° hinged "midget" open end wrenches 3,2 - 17 mm
- 34 - Inch 15° and 75° hinged "midget" open end wrenches 3/16" - 11/16"
- 45 - Power open end wrenches 30 - 75 mm
- Open end wrench sets
- Ring wrenches
- 55A - Metric offset-ring wrenches 6 - 50 mm
- 55A - Inch offset-ring wrenches 1/" - 1'1/4"
- 59 - Metric straight offset-ring wrenches 6 - 32 mm
- 59L - Metric long double ended ring wrenches 6 - 19mm
- 59L - Inch long double ended ring wrenches 1/4” - 13/16”
- 56A - Inch 10° hinged short-reach ring wrenches, 3/16" - 13/16"
- 56L - Long-reach metric offset ring wrenches with 10° angle, 6 - 32 mm
- 56L - Inch 10° hinged long-reach ring wrenches
- 59TX - Straight ring wrenches with Torx® profile - E24
- 57 - Metric half-moon offset-ring wrenches 10 - 22 mm
- 54A - Metric "heavy-duty" offset-ring wrenches 24 - 70 mm
- 54 - Handles for 54A wrenches
- 51B - Metric polygon impact wrenches 24 - 115 mm
- 51B - Inch polygon impact wrenches 1/4" - 4'1/8"
- 51BS - Metric safety slogging wrenches, 24 - 80 mm
- 50.SH - Safety handle for slogging wrenches
- Ring wrench sets
- Angled socket wrenches
- 75 - Forged metric 6 x 6 point angled open-socket wrenches 6 - 38 mm
- 75 - Forged inch 6 x 6 point angled open-socket wrenches 1/4" - 1'
- 76 - Forged metric 12 x 6 point angled open-socket wrenches 6 - 38 mm
- 92A - Metric angled box wrenches 4 - 32 mm
- 160A - Bars for wrenches 91A, 92A and 97
- Angled socket and box wrench sets
- Socket wrenches
- 74A - Forged socket wrenches with metric screwdriver handle 3,2 - 14 mm
- 74T - Forged socket wrenches with metric tee handle 5 - 14 mm
- 94A - Wrenches engaged in tube with metric screwdriver handle 3,2 - 14 mm
- 98B - Tee socket wrenches with metric slide handle 6 - 17 mm
- 99C - Universal joint tee socket wrenches with metric slide handle 6 - 19 mm
- 66A - Metric hinged combination wrenches 6 - 32mm
- 66A - Inch hinged combination wrenches 3/8" - 3/4"
- 66A - Inch hinged combination wrenches TORX E6 - E24
- Socket wrench sets
- Flare - nut wrenches
- Variable opening wrenches
- 113A.C - Chrome adjustable wrenches up to 62 mm
- 113A.CG - Chromed sheath adjustable wrenches up to 80mm
- 113A.T - Phosphated adjustable wrenches up to 132 mm
- 113A.TG - Sheathed phosphated adjustable wrenches up to 80 mm
- 105 - Monkey wrenches up to 80 mm
- 101.G - adjustable wrenches up to 50 mm
- 101.GR - adjustable wrenches with an inverted jaw up to 50 mm
- 101 - adjustable wrenches up to 63 mm
- Hook and pin wrenches
- 125A - Hinged models 15 - 180 mm
- 115A - Monkey wrenches 10 - 200 mm
- 119 - Heavy-duty hook and pin wrenches 120 - 324
- 126A - Hinged hook and pin wrenches 15 - 180 mm
- 126E - spare hooks for 126A wrenches
- 116 - Sliding-jaw hook and pin wrenches 0 - 200 mm
- 116E - spare hooks for 116 wrenches
- 117B - Wrench for nuts with holes bored on the face 20 - 100 mm
- 117.E - spare hooks for 117.B wrenches
- Wrench for nuts with slot on the face, 20 - 100 mm
- 118.EC - spare hooks for 118A wrenches
- Combination wrenches
- Ratchets, sockets and accessories
- 1/4"
- Socket sets 1/4"
- R - ratchets 1/4"
- R - socket accessories 1/4"
- R - 1/4" drive metric 6-point sockets, 3,2 - 14 mm
- R - 1/4" drive inch 6-point sockets 3/16" - 9/16"
- Seria R.E - 1/4" drive metric 12-point sockets 5,5 - 14 mm
- R.E - 1/4" drive inch 12-point sockets 3/16" - 9/16"
- R.B - 1/4" drive inch 12-point thin wall sockets 3/16" - 9/16"
- R.LA - 1/4" long-reach metric 6-point sockets 3,2 - 14 mm
- R.EL 1/4" long-reach metric 12-point sockets 4 - 14 mm
- R.EL - 1/4" long-reach inch 12-point sockets 3/16" - 9/16"
- R.HEL - 1/4" long - reach inch 6-point sockets, 1/8" - 9/16"
- R.F - 1/4" drive hinged inch 12-point sockets 3/16" 9/16"
- RTX - 1/4" Torx® sockets E4 - E10
- RT 1/4" drive metric 6-point sockets 2 - 10 mm
- RT 1/4" drive inch 6-point sockets 1/8" - 1/4"
- RX 1/4" drive Torx® bit sockets T6 - T40
- 1/4" drive metric 6-point sockets, ultracompact, 5,5 - 14 mm
- 3/8"
- Socket sets 3/8"
- J - ratchets 3/8"
- J - socket accessories 3/8"
- J.H - 3/8" metric 6-point sockets 7 - 24 mm
- J - 3/8" metric 12-point sockets 7 - 24 mm
- J - 3/8" inch 12-point sockets 1/4" - 1"
- JB - 3/8" inch 12-point sockets, 1/4" - 7/8"
- J.HLA - 3/8" long-reach metric 6-point sockets 7 - 24 mm
- J.LA - 3/8" long-reach metric 12-point sockets, 7-24 mm
- JB - 3/8" inch 12-point sockets 1/4" - 1"
- J.F - 3/8" drive hinged inch 12-point sockets, 3/8" - 3/4"
- JTX - 3/8" Torx® sockets E8 - E16
- JT - 3/8" drive metric bit sockets, 3 - 10 mm
- JT - 3/8" drive inch bit sockets 1/8" - 3/8"
- JX - 3/8" Torx® drive sockets, T10 - T55
- 1/2"
- Socket sets 1/2"
- S - ratchets 1/2"
- S - socket accessories 1/2 "
- S.H - 1/2" metric 6-point sockets 8 - 34 mm
- S.H - 1/2" inch 6-point sockets, 3/8" - 1'1/4"
- S - 1/2" metric 12-point sockets, 8 - 34 mm
- S - 1/2" inch 12-point sockets, 3/8" - 1'1/4"
- S.HLA - 1/2" long-reach metric 6-point sockets 12 - 32 mm
- S.LA - 1/2" long-reach metric 12-point sockets, 12 - 32 mm
- S.LA - 1/2" long-reach inch12-point sockets 1/2" - 1'1/4"
- STX - 1/2" Torx® sockets, E12 - E24
- STM - 1/2" drive metric hexagon bit sockets, 4 - 19 mm
- ST - 1/2" drive inch hexagon bit sockets, 1/4" - 3/4"
- SHP.LA - 1/2" drive long and extra-long reach metric hexagon bit sockets, 6 - 12 mm
- SXM - 1/2" drive Torx® bit sockets, T20 - T60
- SX.LA - 1/2" drive long-reach Torx® bit sockets, T40 - T70
- D.B - Long-reach spline driver sockets, 7 -16 mm
- SV.B - 1/2" drive XZN® spline bit sockets, M6 - M16
- SV.LB - 1/2" drive long-reach XZN® spline bit sockets, M6 - M14
- 3/4"
- Socket sets 3/4"
- K - ratchets 3/4"
- K - socket accessories 3/4"
- K.HB 3/4" drive metric 6-point sockets, 19 - 55 mm
- K.B 3/4" drive metric 12-point sockets, 19 - 55 mm
- K.B 3/4" drive inch 12-point sockets, 3/4" - 2'1/4"
- K.LA 3/4" long-reach metric 6-point sockets, 19 - 42 mm
- KT.A 3/4" drive metric bits for hexagon socket heads, 14 - 22 mm
- 1"
- "Impact" range
- 1/4"
- 3/8"
- 1/2"
- Seria N.A - impact accessories 1/2"
- NS.23A - 1/2" impact bit holder sockets
- NS.A - 1/2" drive metric 6-point impact sockets, 8 - 32 mm
- NS.A - 1/2" drive inch 6-point impact sockets, 3/8" - 1'1/16"
- NS.LA - 1/2" drive long-reach metric 6-point impact sockets, 8 - 32 mm
- NSB - 1/2" drive long-reach metric thin-wall 6-point impact sockets, 8 - 32 mm
- NSTX Torx® 1/2" impact sockets, E10 - E24
- NSTX.L - Torx® 1/2" female impact sockets, E10 - E24
- NSX 1/2" drive impact bits for Torx® heads, T30 - T60
- Seria NSX.L - NSX.L - Torx® 1/2" male impact sockets, T20 - T70
- NSHM 1/2" drive metric impact bits for hexagon socket heads, 5 - 19 mm
- NSD.B - 1/2" drive metric 12-point impact sockets, 8 - 36 mm
- NSD.L - 1/2" drive metric long-reach metric 12-point impact sockets, 8 - 36 mm
- Seria NSB - nasadki udarowe 1/2" 12-kątne, calowe, 7/16" - 1/2"
- NSV - XZN® 1/2" male impact sockets
- NSV.L - XZN® 1/2" male long-reach impact sockets, M10 - M18
- 3/4"
- N.A - impact accessories 3/4"
- NK.A - 3/4" drive metric 6-point impact sockets, 17 - 46 mm
- NK.A - 3/4" drive inch 6-point impact sockets, 3/4" - 1'5/8"
- NK.LA - 3/4" drive metric long-reach metric 6-point impact sockets, 17 - 46 mm
- NKD.A - 3/4" drive metric 12-point impact sockets, 16-46 mm
- NKD.L - 3/4" drive metric long-reach metric 12-point impact sockets, 7-46 mm
- NKB - 3/4" drive long-reach metric thin-wall 6-point impact sockets, 21 - 36 mm
- NKHM - 3/4" drive metric impact bits for hexagon socket head, 17 - 24 mm
- NKTX.L - Torx® 3/4" female impact sockets, T18 - T24
- NKXR - Torx® 3/4" Tamper impact sockets, TT70 - TT100
- NKVR - XZN® 3/4" Tamper impact sockets, M16 - M18
- NK.300 - 3/4" drive Dynapact manual impact wrench
- 1"
- Seria N.A - impact accessories 1"
- NM.A - 1" drive metric 6-point impact sockets, 21 - 77 mm
- Seria NM.A - nasadki udarowe 1" 6-kątne, calowe, 1" - 2'1/8"
- NM.LA - 1" drive long-reach metric 6-point impact sockets, 22 - 70 mm
- NMB - Long-reach 6-point thin-wall sockets, 24 - 50 mm
- NM.ELA - 1" drive extra-long reach metric 6-point impact sockets, 30 - 33 mm
- M.TR - Special "Trailer" 1" drive metric impact sockets, 77 mm
- NM.300 - 1" drive Dynapact manual impact wrench
- NMD.65A - 12-point 1” impact socket
- 1'1/2"
- Safety pins and rings for impact tools
- Impact socket sets
- Insulated
- R.J.S.151AVSE - 1,000 Volt insulated ratchets, 1/4" - 3/8" - 1/2"
- R.J.S.210-215AVSE - 1000 V insulated extensions, 1/4" - 3/8" - 1/2"
- J.S.121AVSE - 1,000 Volt insulated handles 3/8" - 1/2"
- R.AVSE - 1,000 Volt insulated 6-point 1/4" sockets
- RT.AVSE - 1,000 Volt insulated 6-point 1/4" bit sockets, 4 - 6 mm
- J.AVSE - 1,000 Volt insulated 12-point 3/8" sockets, 8 - 19 mm
- Seria J.LAVSE - 1,000 Volt insulated long 12-point 3/8" sockets, 8 - 19 mm
- JT.AVSE - 1,000 Volt insulated male 6-point 3/8" bit sockets, 4 - 10 mm
- S.AVSE - 1,000 Volt insulated 12-point 1/2" sockets, 8 - 22 mm
- S.LAVSE - 1,000 Volt insulated long 12-point 1/2" sockets, 12 - 19 mm
- ST.AVSE - 1,000 Volt insulated male 6-point 1/2" bit sockets, 8 - 17 mm
- 1,000 Volt insulated tool sets
- Non sparking
- Seria SKM.SR - Non sparking 1/2" - 3/4" - 1" ratchets
- S.SR - Non sparking 1/2" metric 12-point sockets, 6 - 32 mm
- S.SR - Non sparking 1/2" inch 12-point sockets, 5/16" - 1'7/16"
- K.SR - Non sparking 3/4" metric 12-point sockets, 17 - 50 mm
- K.SR - Non sparking 3/4" inch 12-point sockets, 3/4" - 2" - 50 mm
- M.SR - Non sparking 1" metric 12-point sockets, 22 - 80 mm
- M.SR - Non sparking 1" inch 12-point sockets, 1'1/16" - 3"
- SKM.120SR - Non sparking 1/2" - 3/4" - 1" sliding tee
- SKM.240SR - Non sparking 1/2" - 3/4" - 1" universal joints
- SKM.SR - Non sparking 1/2" - 3/4" - 1" extensions
- 1/4"
- Torque control
- "Multi-purpose" click wrenches
- "High performance" click wrenches
- 306M - wrenches with non removable ratchet, 5 - 340 Nm
- 306MF - wrenches with hinged ratchet, 100 - 340 Nm
- 306A - click wrenches with removable ratchet, 1 - 1000 Nm
- 306U - click wrenches with dual Ibf.in or Ibf.ft, supplied with removable ratchet
- R.306-5 - "Low torque" click wrench with fixed ratchet
- 306R - click wrenches with attachment 20 x 7 mm
- 306D - click wrenches without accessories, 1 - 1000 Nm
- 306D - sets with accessories, 5 - 350 Nm
- Electronic torque wrenches
- E.306D - Electronic torque wrenches without accessories, 1,5 - 340 Nm
- E.306A - Electronic torque wrenches with removable ratchet, 1,5 - 340 Nm
- E.316D - Electronic torque / angle measuring wrenches, without accessories, 1,5 - 340 Nm
- E.316D - Electronic torque / angle measuring wrenches, with removable ratchet, 1,5 - 340 Nm
- Electronic adapters
- Manual reset wrenches
- High-torque wrenches
- Production wrenches
- "Low torque" screwdrivers
- "Production" torque screwdrivers
- Electronic torque screwdrivers
- Torque multiplier
- Torque controllers
- Accessories 9x12mm
- J-S.372 - 3/8" - 1/2" ratchets - drive 9x12
- R-J-S.372V - 1/4" - 3/8" - 1/2 " compact ratchets - drive 9x12
- R-J-S.373 - 1/4" - 3/8" - 1/2" square drive - drive 9x12
- 10 - metric open end bits - drive 9x12, 7 - 19 mm
- 10 - inch open end bits - drive 9x12, 1/4" - 3/4"
- 12 - polygon drives - drive 9x12, 7 - 19 mm
- 12 - inch ring ends - 9x12 end fitting, 1/4" - 3/4"
- Accessories 14x18 mm
- S.382 - ratchet - drive 14x18, 1/2"
- S-K.382V - compact ratchets - drive 14x18, 1/2" - 3/4"
- S-K.383 - square drive - drive 14x18, 1/2" - 3/4"
- 11 - metric open end bits - drive 14x18, 13 - 32 mm
- 11 - inch open end bits - drive 14x18, 1/2" - 1'1/16"
- 13 - polygon drives - drive 14x18, 13 - 36 mm
- 13 - Inch polygon bits - drive 14x18, 1/2" - 1'1/16"
- Accessories 20x7 mm
- Special accessories
- Set of accessories
- Screwdrivers
- PROTWIST screwdrivers with sand-blasted tip
- AS - PROTWIST® screwdrivers for slotted head screws 2,5 - 10 mm
- ASP - PROTWIST® screwdrivers with sand-blasted tip for Phillips® screws, PH0 - PH3
- ASD - PROTWIST® screwdrivers with sand-blasted tip for Pozidriv® screws, PZ0 - PZ3
- ASX - PROTWIST® screwdrivers with sand-blasted tip for Torx® screws T10 - T30
- PROTWIST screwdrivers with „tri-coating” tip
- AN - PROTWIST® screwdrivers for slotted head screws - milled blades, 2 - 6,5 mm
- AN - PROTWIST® screwdrivers for slotted head screws - short blades, 4 - 6,5 mm
- AWH - PROTWIST® screwdrivers for slotted head screws - power series, 5,5 - 14 mm
- ANF - PROTWIST® screwdrivers for slotted head screws - forged blades, 5,5 - 10 mm
- ANP - PROTWIST® screwdrivers for Phillips® screws - round blades, PH0 - PH4
- AWDH - PROTWIST® screwdrivers for Pozidriv® screws - power series, PZ1 - PZ4
- AWPH - PROTWIST® screwdrivers for Phillips® screws - power series, PH1 - PH4
- ANP - PROTWIST® screwdrivers for Phillips® screws - short blades, PH1 - PH2
- AND - PROTWIST® screwdrivers for Pozidriv® screws - round blades, PZ0 - PZ4
- AND - PROTWIST® screwdrivers for Pozidriv® screws - short blades, PZ1 - PZ2
- ANSQ - PROTWIST® screwdrivers for ROBERTSON square head screws
- ANX - PROTWIST® screwdrivers for Torx® screws, T6 - T40
- ANXP - PROTWIST® screwdrivers for Torx Plus® screws, IP5 - IP40
- ANXR - PROTWIST® screwdrivers for Resistorx® screws, TT10 - TT40
- ANXRP - PROTWIST® screwdrivers for Torx Plus® screws, IPR10 - IPR40
- Sets of PROTWIST® screwdrivers with „tri-coating” tip
- PROTWIST INOX stainless steel screwdrivers
- A.ST - AF.ST - PROTWIST® stainless steel screwdrivers for slotted head screws 4 - 8mm
- AP.ST - PROTWIST® stainless steel screwdrivers for Phillips® screws PH1 - PH2
- AD.ST - PROTWIST® stainless steel screwdrivers for Pozidriv® screws PZ1 - PZ2
- AX.ST - PROTWIST® stainless steel for Torx® screws, T10 - T40
- Sets of PROTWIST INOX screwdrivers
- PROTWIST SHOCK screwdrivers
- PROTWIST FLUO fluorescent screwdrivers
- AN.F - PROTWIST® screwdrivers for slotted head screws - FLUO 2,5 - 6mm
- AW.F - PROTWIST® screwdrivers for slotted head screws - hexagonal blades - FLUO 8 - 10 mm
- AN.P - PROTWIST® screwdrivers for Phillips® screws - FLUO PH0 - PH4
- AWP.F - PROTWIST® screwdrivers for Phillips® screws - hexagonal blades - FLUO PH2
- AWHS.F - Spherical head spinner hexagon keys - FLUO 3 - 5 mm
- Bit and socket holders - FLUO
- Sets of FLUO screwdrivers
- Diamond-tip screwdriver for PROTWIST
- PROTWIST 1,000 Volt insulated screwdrivers
- A.VE - PROTWIST® 1,000 Volt insulated screwdrivers for slotted-head screws 2 - 12 mm
- AP.VE - PROTWIST® 1,000 Volt insulated screwdrivers for Phillips® head screws PH0 - PH4
- AD.VE - PROTWIST® 1,000 Volt insulated screwdrivers for Pozidriv® head screws PZ0 - PZ3
- APB - PROTWIST® BORNEO® screwdrivers for mixed heads - Phillips® PH1
- ADB.VE - PROTWIST® BORNEO® screwdrivers for mixed heads - Pozidriv® PZ1
- Sets of 1,000 Volt insulated screwdrivers
- Seria A.TVE - wkretaki izolowane, grot cienki, płaskie 3,5 - 6, PH1-PH2, PZ1-PZ2
- ISORYL screwdrivers
- AR - ISORYL screwdrivers for slotted-head screws - milled blade 2 - 8 mm
- ARA - ISORYL screwdrivers for slotted-head screws - handle with clasp 2,5 - 3,5 mm
- AGT - ISORYL screwdrivers for slotted-head screws - forged blade - T handle 2,5 - 3,5 mm
- ARB - ISORYL screwdrivers for slotted-head screws - short blade 4 - 6,5 mm
- AD - ISORYL screwdrivers for Pozidriv® screws PZ0 - PZ3
- ADB - ISORYL screwdrivers for Pozidriv® screws - short blade PZ1 - PZ2
- AP - ISORYL screwdrivers for Phillips® screws PH0 - PH4
- APB - ISORYL screwdrivers for Phillips® screws - short blade PH0 - PH2
- Sets of ISORYL screwdrivers
- Wood handle screwdrivers
- ATH - Wood handle screwdrivers for slotted head screws - forged blade 5,5 - 12 mm
- ATHH - Wood handle screwdrivers for slotted head screws - hexagonal forged blade 4 - 14 mm
- ATHH.P - Wood handle screwdrivers for Phillips® screws - hexagonal blade PH1 - PH3
- ATHH.D - Wood handle screwdrivers for Pozidriv® screws - hexagonal blade PZ1 - PZ3
- Sets of wood handle screwdrivers
- Multiblade screwdrivers
- Bit - holding screwdrivers
- Voltage - tester screwdrivers
- Magnetisers
- Screw holders
- Angled screwdrivers
- PROTWIST screwdrivers with sand-blasted tip
- Keys
- Angled keys
- 83SH - Long metric keys 6-point, spherical head, 1,5 - 12 mm
- 83SH - Long inch keys 6-point, spherical head, 3/32" - 3/8"
- 83S.L - Extra long keys, 6-point, spherical head, 2 - 10 mm
- 83H - Long metric keys, 6-point, 1,5 - 32 mm
- 83H - Long inch keys, 6-point, 0,50" - 9/16"
- 82H - Short metric keys, 6-point, 0,9 - 32 mm
- 82H - Short inch keys, 6-point, 0,28" - 1"
- 83SH.ST - Stainless steel keys - hexagonal, 1,5 - 10 mm
- 89S - Long Torx® keys - spherical head, T15 - T45
- 89 - Short Torx® keys T6 - T55
- 89R - Short Resistorx® keys, T10 - T40
- Angled hexagon key sets
- Seria 80 - hexagon keys for multiple XZN teeth
- Keys with handle
- 84TZA - Metric hexagon keys, "T" handle, 6-point, 2,5 - 10 mm
- 84TZ - Inch hexagon keys, "T" handle, 6-point, 5/32" - 3/8"
- Seria 84TZSA - klucze trzpieniowe z rękojeścią oprawianą "T", 6-kątne, metryczne, z kulką
- 89TXA - Torx® spinners, "T" handle, T6-T50
- 84TC - Metric hexagon keys, "T" handle, 6-point, 2 - 14 mm
- 84TCD - Tee wrenches with sliding bar, "T" handle, 6-point, 2,5 - 8 mm
- 84TCS - Fast hexagon spinners, "T" handle, 6-point, 4 - 8 mm
- AWHS - Spherical head spinner hexagon keys, PROTWIST handle, 6-point, 2 - 8 mm
- AWHH - Spinner hexagon keys, PROTWIST handle, 6-point, 2 - 8 mm
- Sets of spinner hexagon keys
- Angled keys
- Bits
- Series 0 - 4mm drive, standard
- ES.0 - Screw bits for slotted head screws 1,8 - 4,5 mm
- EP.0 - Screw bits for Phillips® screws PH00 - PH0
- ED.0 - Screw bits for Pozidriv® screws, PZ00 - PZ1
- EH.0 - Screw bits for countersunk hex head screws 0,9 - 2,5 mm
- ETS.0 - Screw bits for countersunk hex spherical head screws 1,5 - 2,5 mm
- EX.0 - Screw bits for Torx® screws T6 - T10
- Socket holder bit 4mm - 1/4"
- Series 1 - 1/4" - 6,35 mm drive, standard
- ES.1 - Standard bits series 1 for slotted head screws 3 mm
- EP.1 - Standard bits series 1 for Phillips® screws PH0 - PH2
- ED.1 - Standard bits series 1 for Pozidriv® screws PZ0 - PZ2
- ECAR.1 - Standard bits series 1 for ROBERTSON square head screws 1 - 3
- EX.1 - Standard bits series 1 for Torx® screws T6 - T40
- EXP.1 - Standard bits series 1 for Torx Plus® screws IP6 - IP40
- EXR.1 - Standard bits series 1 for Resistorx® screws TT10 - TT40
- EXP.1 - Standard bits series 1 for Tamper Resistant Torx Plus® screws IPR8 - IPR40
- ETS.1 - Standard bits series 1 with spherical head for countersunk hex screws 2,5 - 6 mm
- EH.1 - Screw bits series 1 for metric countersunk hex head screws 1,5 - 10 mm
- EH.1 - Screw bits series 1 for inch countersunk hex head screws 1/8"- 1/4"
- EV.1 - Standard bits series 1 for XZN multiple teeth head screws M4 - M10
- ETRI.1 - Standard bits series 1 for Tri-wing head screws 1 - 5
- EBNA.1 - Standard bits series 1 for BNAE head screws 4 - 6
- ETOR - Standard bits series 1 for Torq Set® head screws 0 - 10
- Sets of standard series 1 bits - 1/4" - 6.35 mm drive
- Series 1 - 1/4" - 6,35 mm drive, 'High Perf'
- Series 1 - 1/4" - 6,35 mm drive, 'High Perf' titanium
- ES.12T - High Perf' Titanium bits series 1 for slotted head screws 4,5 - 8 mm
- EP.13T - High Perf' Titanium bits series 1 for Phillips® screws PH1 - PH3
- ED.13T - High Perf' Titanium bits series 1 for Pozidriv® screws PZ1 - PZ3
- Sets of high power Titanium series 1 bits - 1/4" - 6.35 mm drive 1/4" - 6,35 mm
- Series 2 - 5/16" - 7,94 mm drive, standard
- ES.2 - Standard bits series 2 for slotted head screws 6,5 - 12 mm
- EP.2 - Standard bits series 2 for Phillips® screws PH1 - PH4
- ED.2 - Standard bits series 2 for Pozidriv® screws PZ1 - PZ4
- EX.2 - Standard bits series 2 for Torx® screws T20 - T50
- EH.2 - Standard bits series 2 for countersunk hex screws 4 - 10 mm
- Standard bits series 2 for countersunk hex screws 1/4"- 3/8"
- EH.2L - Standard long bits series 2 for countersunk hex screws 4 - 10 mm
- EV.2 - Standard bits series 2 for XZN multiple teeth head screws XZN M6 - M12
- EV.2L - Standard long bits series 2 for XZN multiple teeth head screws M5 - M10
- ETORM.2 - Standard bits series 2 for Torq Set® head screw 8 - 10, 1/4 - 3/8
- EBNA.2 - Standard bits series 2 for BNAE head screws 4 - 8
- Series 2 - 5/16" - 7,94 mm drive, impact
- ENS.2 - Impact bits series 2 for slotted head screws 5,5 - 14 mm
- ENP.2 - Impact bits series 2 for Phillips® screws PH1 - PH4
- END.2 - Impact bits series 2 for Pozidriv® screws PZ1 - PZ4
- ENH.2 - Impact bits series 2 for hex countersunk screws 4 - 10 mm
- ENX.2 - Impact bits series 2 for Torx® screws T20 - T55
- NJ-NS.236A - Bit holder impact sockets 5/16"
- Impact screwdrivers
- Sets of impact bits
- Series 3 - 1/2" - 12,7 mm drive, impact
- ENS.3 - Impact bits series 3 for slotted head screws 12 - 16 mm
- ENH.3 - Impact bits series 3 for metric hex countersunk screws 3 - 19 mm
- ENH.3 - Impact bits series 3 for inch hex countersunk screws 1/2" - 7/16"
- NEX - Impact bits series 3 for Torx® screws T25 - T70
- N.237A - Bit holder impact sockets 1/2"
- Impact screwdrivers
- Sets of impact bits
- Series 6 - 1/4" - 6,35 mm grooved drive, standard
- ES.6 - Standard bits series 6 for slotted head screws 3 - 5,5 mm
- EP.6 - Standard bits series 6 for Phillips® screws PH1 - PH3
- ED.6 - Standard bits series 6 for Pozidriv® screws PZ1 - PZ3
- EX.6 - Standard bits series 6 for Torx® screws T10 - T40
- EH.6 - standard bits series 6 for countersunk hex screws, 3 - 8 mm
- ECAR.6 - standard bits series 6 for robertson square head screws, 1 - 3
- ETORM.6 - standard bits series 6 for TORQ SET head screws 2 - 10, 1/4
- EF.6DM - magnetic sockets for hex screws, 5,5 - 13 mm
- EF.6D - sockets for hex screws, 5,5 - 13 mm
- Sets of 3 standard bits series, drive 1/4" - 6,35 mm
- Series 6 - 1/4" - 6,35 mm grooved drive, 'High Perf'
- Series 6 - 1/4" - 6,35 mm grooved drive, 'High Perf' titanium
- Bit holders and accessories
- Series 0 - 4mm drive, standard
- Pliers
- Multigrip pliers
- Combination pliers
- Flat-nose pliers
- Round and half - round nose pliers
- Diagonal cutters
- End cutters
- Wire stripper
- Inside Circlip pliers
- Outside Circlips pliers
- Removable tip pliers
- Snap-ring pliers
- Locking-wire pliers
- Lock-grip pliers
- End nippers
- Plastics cutters
- "Connector" pliers
- Plier sets
- Metrology, measuring
- Calipers
- Depth gauge
- Micrometer
- Comparators
- Rangefinders, measuring lasers
- Dial gauges
- Surface gauges
- Metrology sets
- Rules
- Tape measures
- Folding rules
- Levels
- Surface plates and V-blocks
- Squares
- Bevel protractors
- Feeler gauges and gauges
- Marking-out tools
- Marking-out
- Sounding leads and sounding line gauges
- Accesories
- Hammers, impact tools
- Hammers
- 200C - graphite handle riveting engineers hammer, 0,3 - 2,8 kg
- 200H - riveting engineers hammers, 0,3 - 2,8 kg
- 205C - graphite handle din engineers hammer, 0,2 - 1,1 kg
- 205H - din engineers hammers, 0,2 - 1,1 kg
- 202H - ball head engineers hammers, 0,1 - 1,1 kg
- 860H - dinging hammers, round face, 0,3 - 0,9 kg
- 859H - dinging hammer, square face, 0,6 kg
- 213H - welders chipping hammers, 0,3 - 0,5 kg
- 203H - electricians hammer, 0,16 - 0,2 kg
- 215H - joiners hammers, 0,2 - 0,4 kg
- 204 - carpenters hammer, 0,8 kg
- 1262H - beveled edge club hammers, 1 - 1,5 kg
- 1263H - high load club hammer, 4,8 kg
- 209 - wooden mallets, 0,3 - 0,5 kg
- Wooden handles
- Soft face hammers
- Drifts
- Nail-sets
- 249G - sheathed drift punches, 2 - 16 mm
- 247G - sheathed nail sets, 2 - 8 mm
- 249 - standard drift punches, 2 - 10 mm
- 248 - one-piece drift punches, 2 - 10 mm
- 246 - drift punches for spring pins, 2 - 8 mm
- 251A - precision sleeved drift punches, 1 - 6 mm
- 247 - nail sets, 2 - 8 mm
- 217.GJ1 - drifts set - 3 materials: brass-polyamide-aluminum
- Impact tools set
- Centre punches
- Flat chisels - Cape chisels
- 263.G - sheathed chisels, 15 - 25 mm
- 263 - slim chisels, 21 - 27 mm
- 259 - slim-profile chisels, 26 mm
- 263P - chisels with guard, 27 mm
- 259.P - slim-profile chisel with guard, 26 mm
- 260.P - wide chisel with guard, 60 mm
- 262A - ribbed chisels, round head, 21 - 29 mm
- 265 - cape chisels, 8 - 10 mm
- Zestawy przecinaków i przebijaków
- Sets and modules
- Hammers
- Sawing, drilling, cutting
- Sawing
- 603F- "high performance" hacksaw frame, 8 blade positions
- 601 - compact hacksaw frame, 2 blade positions
- MOD.601 - saw, measuring, file module
- 606A - straight frame with blade backing
- 605.B - revolver frame with sliding blade-guide
- 599 - flat bow frame - adjuster fitting
- 668B - cobalt steel bimetal saw blades, 300 mm
- Files
- Drill bits
- Taps and dies
- Holesaws
- Mills
- Scrapers
- Metal shears
- Bolt croppers
- Cable cutters
- Knives
- 844.D - safety knife with retractable blade
- 844.R - retractable utility knife with interchangeable blades
- 844.S - cutters with snap-off blades
- Seria 844 - spare blades for 844 knives
- 840LE - thumbwheel knife
- 840.4A - lock-back knife
- 840.F - lock-back knife with bi-material handle
- 640180 - twin-blade electricians knife with plastic handle
- 843 - twin-blade electricians knife with wood handle
- 840B - electricians knife with wire stripper
- 840.1 - Electricians knife with wire stripper with wood handle
- Scissors
- Punch kit
- Sawing
- Pullers
- Mechanical 3 - leg pullers
- U.306 - outside pullers 4t, 7-260 mm
- U.306N - Inside pullers 4t, 23-170 mm
- U.310 - outside pullers 10t, 12-250 mm
- U.310N - inside pullers 10t, 50-230 mm
- U.302 - inside pullers with slim legs 2,4t, 17-200 mm
- U.20 - reversible universal 2-leg pullers, 25-170 mm
- U.20B - long-reach leg outside puller 7t, 25-260 mm
- U.27AS3 - wide spread grip puller 6t, 30-800 mm
- U.320 - high-capacity 20t outside puller, 100-360 mm
- U.330 - 30t hydraulic outside puller, 100-530 mm
- Inside/outside puller kits
- Hydraulic 3 - leg pullers
- Mechanical 2 - leg pullers
- U.32T - lockable 2-leg sliding-leg pullers 2-15t, 20-470 mm
- U.232 - 2-leg sliding-leg pullers 15-50t, 30-346 mm
- U.14 - Self-gripping outside pullers with slim legs 0,5t, 10-45 mm
- U.301 - self-gripping outside pullers with slim legs 9-13t, 10-200 mm
- U.301LMP - self-gripping outside pullers with wide legs 0,9-1,3t, 15-110 mm
- U.35 - pullers with outside wide legs 1-3t, 10-75 mm
- U.34 - high-capacity wide leg outside puller 7t, 40-180 mm
- U.42 - pullers with yoke 1,5t, 10-85 mm
- U.52 - high-capacity pullers with yoke 6t, 10-150 mm
- Special grip bearing pullers
- U.23J - tip-type pullers, cage grip
- U.23D - set of 2 tips
- U.51B - tip-type pullers, inside grip, 32-70 mm
- U.28 - tip-type pullers, large spread inside grip, 70-160 mm
- U.30 - beam for pullers U.28 and U.51B
- U.40 - beam for pullers U.51B and U.306
- U.49PJ- spreader-type pullers, inside grip, 8,5-60 mm
- U.49P - clamps for inside grip
- Adaptor tip for clamps and slide hammers
- Slide hammers
- Separators and beam pullers
- Stud extractors
- Seria 285 - unit stud pullers, right-hand pitch
- 285.J - single tapered drill bits for pullers 285
- 285.J - set of stud pullers, right-hand pitch
- 885 - drill bits and pullers for stud pulling, right or left-hand pitch
- 885 - set of stud pullers, right or left-hand pitch
- 286A - roller-type stud drivers - multi-diameter, 5-27 mm
- 287B - roller-type stud drivers - single-diameter, 6-16 mm
- 287B.JS5 - set of roller-type stud drivers, 6-10 mm
- Nut splitters
- Puller sets
- Spare parts and accessories
- Mechanical 3 - leg pullers
- Lighting
- Power tools
- Cordless tools
- Personal equipment, maintenance
- Pipework tools, vices and clamps
- Pipe wrenches
- 131A - steel stillson models, capacity: 0 to 102 mm
- 134A - cast-iron american model pipe wrenches, capacity: 0 to 140 mm
- 135A - light alloy 90° offset american model pipe wrenches, capacity: 0 to 76 mm
- 133A - light alloy 90° offset american model pipe wrenches, apacity: 0 to 140 mm
- 120A - "swedish" model wrench - 45°, capacity: 10 to 60 mm
- 121A - "swedish" model wrench - "s" jaws - 45°, capacity: 10 to 60 mm
- 136A - double effect chain wrench, capacity: 60 to 140 mm
- 137A - high power chain wrench, capacity: 50 to 180 mm
- 138A - nylon strap wrenches, capacity: 0 to 165 mm
- Chains and strap wrenches
- Benders
- Pipe cutters
- Tools for deburring-chamfering pipes
- Clamp tools
- Riveting pliers
- Vices
- Assembly presses
- Clamps
- Pipe wrenches
- Non-sparking tools
- ADF wrenches
- 440.SR - non sparking metric combination wrenches, 6 - 70 mm
- 440.SR - non sparking inch combination wrenches, 1/4" - 1'3/8"
- 113A.SR - non sparking adjustable wrenches, 18 - 55 mm
- 50.SR - non sparking metric impact ring wrenches, 17 - 150 mm
- 50.SR - non sparking inch impact ring wrenches, 11/16" - 4'1/8"
- 49.SR - non sparking metric impact open end wrenches, 17 - 150 mm
- 75.SR - non sparking metric angled socket wrenches, 6 - 41 mm
- ADF pliers
- ADF ratchets, sockets
- SKM.SR - non sparking ratchets, 1/2" - 3/4" - 1"
- S.SR - non sparking 1/2" inch 12-point sockets, 6 - 32 mm
- S.SR - non sparking 1/2" inch 12-point sockets, 5/16" - 1'7/16"
- K.SR - non sparking 3/4" metric 12-point sockets, 17 - 50 mm
- K.SR - non sparking 3/4" inch 12-point sockets, 3/4" - 2"
- M.SR - non sparking 1" metric 12-point sockets, 22 - 80 mm
- M.SR - non sparking 1" inch 12-point sockets, 1'1/16" - 3"
- SKM.120SR - non sparking 1/2" - 3/4" - 1" sliding tee
- SKM.240SR - non sparking 1/2" - 3/4" - 1" universal joints
- SKM.SR - non sparking 1/2" - 3/4" - 1" extensions
- ADF screwdrivers
- ADF hexagon keys
- ADF impact tools
- ADF cutting tools
- ADF pipe wrenches
- ADF wrenches
- Electricity
- Cable-sheath strippers
- Crimping pliers
- Matryce do szczypiec do zaciskania
- Wiring tools
- Wire puller tools
- Hole punches with PG/ISO circular cutout
- 985968-95 - punches for PG size holes with actuating screw, PG7 - PG 29
- 985734-933 - punches and dies for PG size holes without screw, PG7 - PG48
- 693716-7653 - punches for ISO size holes with actuating screw, M12 - M63
- 693708-664544 - punches for ISO size holes without actuating screw, M12 - M63
- 697469-531 - punches - ISO Plus dies for stainless steel plate, M16 - M63
- Hydraulic hole punch equipment
- ISO and PC staged drill bit
- 986051 - drill bit diameter 11 mm
- 986107 - lubricating paste
- Hole punch sets
- Physical measurement
- 1,000 V insulated pliers
- 1,000 V insulated screwdrivers
- A.VE - insulated screwdrivers for slotted-head screws, 2 - 12 mm
- AP.VE - insulated screwdrivers for PHILLIPS® head screws, PH0 - PH4
- AD.VE - insulated screwdrivers for POZIDRIV® head screws, PZ0 - PZ3
- Seria AB.VE - BORNEO® screwdrivers for mixed heads - PHILLIPS®, PH1 - PH2
- ADB.VE - BORNEO® screwdrivers for mixed heads - POZIDRIV®, PZ1 - PZ2
- A.TVE - insulated screwdrivers with a slim tip, 3.5 - 6.5 mm, PH1 - PH2, PZ1 - PZ2
- Insulated screwdriver sets
- 1,000 V insulated tools with safety code
- VSE 1000 Volt series insulated pliers
- 602.AVSE - VSE series 1000 Volt insulated hacksaw frame
- 1820.AVSE - VSE series 1000 Volt insulated knife
- 46.AVSE - VSE series 1000 Volt insulated open end wrenches, 8 - 21 mm
- 55.AVSE - VSE series 1000 Volt insulated offset ring wrenches, 8 - 21 mm
- 113.AVSE - VSE series 1000 Volt insulated adjustable wrenches, 27 - 44 mm
- 83.AVSE - VSE series 1000 Volt insulated keys, 3 - 12 mm
- 94T-TL.AVSE - VSE series 1000 Volt insulated box wrenches, 6 - 19 mm
- Narzędzia nasadowe izolowane 1000 V, seria VSE
- R.J.S.151AVSE - VSE series 1,000 Volt insulated ratchets, 1/4" - 3/8" - 1/2"
- R.J.S.210-215AVSE - VSE series 1000 Volt insulated extensions, 1/4" - 3/8" - 1/2"
- J.S.121AVSE - VSE series 1000 Volt insulated handles, 3/8" - 1/2"
- R.AVSE - VSE series 1000 Volt insulated 6-point 1/4" sockets, 6 - 12 mm
- RT.AVSE - VSE series 1000 Volt insulated 6-point 1/4" bit sockets, 4 - 6 mm
- J.AVSE - VSE series 1000 Volt insulated 12-point 3/8" sockets, 8 - 19 mm
- J.LAVSE - VSE series 1000 Volt insulated long 12-point 3/8" sockets, 8 - 19 mm
- S.AVSE - VSE series 1000 Volt insulated 12-point 1/2" sockets, 8 - 22 mm
- S.LAVSE - VSE series 1000 Volt insulated long 12-point 1/2" sockets, 12 - 19 mm
- ST.AVSE - VSE series 1000 Volt insulated male 6-point 1/2" bit sockets, 8 - 17 mm
- VSE series 1000 volt insulated socket sets and accessories
- J.306-50VSE - VSE series 1000 Volt insulated torque wrench
- Safety gloves and insulated mats
- Insulated tool sets
- Electronics
- Micro - Tech electronic pliers
- Electronic pliers antistatic series
- Micro-Tech screwdrivers
- AEF-AEP - Micro-Tech® replaceable blade screwdriver for slotted head screw, 1 - 2,5 mm
- AEF - Micro-Tech® screwdriver for slotted head screw, 1,5 - 4 mm
- AEFP - AEFD - Micro-Tech® screwdriver for Phillips® PH000 - PH1 and Pozidriv® pattern PZ0 - PZ1
- AEX - Micro-Tech® screwdriver for Torx® screw, T5 - T20
- 84E - Micro-Tech® screwdriver for male hex screws, 0,9 - 2,5 mm
- AEM.M - Micro-Tech® bit holder screwdriver for hex screws, 4 mm
- Standard bits series 0 - drive 4 mm
- ES.0 - screwing bits series 0-drive 4 mm for slotted head screw, 1,8 - 4,5 mm
- EP.0 - screw bits for Phillips® screws, PH00 - PH0
- ED.0 - screwing bits series 0-drive 4 mm for Pozidriv® screws, PZ00 - PZ1
- EH.0 - screw bits for countersunk hex head screws, 0,9 - 2,5 mm
- ETS.0 - screwing bits series 0-drive 4 mm for hollow hex spherical head screws, 1,5 - 2,5 mm
- EX.0 - screwing bits series 0-drive 4 mm for Torx® screws, T6 - T10
- ECR.0 - socket holder bit 4mm - 1/4"
- Micro-Tech® screwdriver kits
- Tweezers
- Soldering tools
- 1003B.E - anti-static digital welder 68 watts
- 1003B.68E - electronic soldering iron, 68 W
- 1230B - 230 volt electronic soldering irons, 15 - 25 W
- BV.21-10 - soldering iron stand
- 1116B.BW - bi-watt iron 20-40 for electronic
- 848B.100 - instant-heat 100 W - 230 V soldering iron
- 947A - high power irons - 230 V, 50 - 400 W
- 1075.H - gas soldering iron, 75 W
- 839 - desoldering pumps
- 1130.1 - desoldering braid, 1,6 m
- Accesorries for electronics
- Automotive
- General workshop equipment
- Mobile lifting equipment, 1,5 - 3,2 t
- DL.3 - axle stands 2,2 t
- Workshop cranes, 0,5 - 1 t
- Headlight beam adjusters
- Device removal jack, 300 kg - 1200 kg
- DL.20SUP - lifting plate
- W.410-450 - hydraulic presses, 10 - 50 t
- DTS.B - inspection creepers
- DTS.4A - mid-height work seat
- CR.D2 - non-magnetic wing cover with suction fasteners
- D.3 - pry bars, 292 - 915 mm
- DL.BTI - heavy duty series bottle jacks
- DL.BTA - standard series bottle jacks
- CR.S20 - stopień warsztatowy
- Hydropneumatic jacks
- Akcesoria
- Electric and hybrid vehicles support
- Oil change - filtration
- D.48-KIT - oil change kit
- D.48 - hinged oil drain wrench
- MB-J15 - set of magnetic oil drain bits and sockets on rack
- DM.B47 - maintenance tools for the engine lubrication system
- D.106-120 - gearbox and differential drain plug bits
- D.106-120 - drain plug wrenches
- Oil-filter wrenches
- Cap wrenches
- OD.80G - Zlewarka do oleju
- D.1VAG-B - drain-plug wrenches and bits
- Akcesoria
- Spark plug tools
- B.J - 3/8" sockets for spark plugs, 14 - 21 mm
- Seria B.S - 1/2" sockets for spark plugs, 16 - 21 mm
- B.JR - 3/8" hinged wrenches for spark plugs, 16 - 21 mm
- L.16-21 - box wrenches for spark plugs, 16 - 21 mm
- DM.28 - spark plug lead pliers
- 804 - feeler gauges
- Spark plug accessories
- B.1R - 3/8" hinged wrenches for glow plugs, 8 - 12 mm
- 3/8" sockets for glow plugs, 10 -12 mm
- DCR - tools for removing damaged glow plugs
- DX.10A - glow plug tester
- Glow plug sets
- Auto electrics support
- Testers and multimeters
- BCA - battery chargers, 3 - 600 Ah
- Boosters
- B124 - Cables for boosters
- Battery tools
- 449.Z1B - auto electricians kit
- 985894 - maintenance crimping pliers for pre-insulated terminals
- DX.25 - 20-piece car radio removal tool set
- DX.RDJ12 - Set of diamond-tip contact cleaning files
- Engine support
- Engine compression testers
- Pressure control accessories
- Diesel dummy glow plugs and injectors
- DA.160 - manual pressure/vacuum pump
- 914 - oil pressure tester
- Common rail injector tools
- Glow plug tools
- Injector tools
- DM.J - fuel gauge wrench
- DM.C - clamp pliers
- X.730B - digital stroboscopic lamp for gasoline engines
- DM.FR2 - diesel filter fitting and removal tool
- DM.F - fast fit fuel pliers
- DM.15 - fuel line pliers
- DM.MUB - spring clamp pliers
- DM.TU - hose removal pliers
- DM.25-29 - self-tightening clamp pliers
- D.133B - flexible nut drivers (6 point), 6 - 10 mm
- 217 - master bearing race and seal drivers, 9,5 - 90 mm
- Cooling circuit tools
- DM.90-91 - screw-type hose clamps
- DM.33-34 - hose clamps
- Cylinder head - valves
- Torque control
- 750.B - piston ring compressors
- 751 - piston ring pliers
- D.145-6A - lambda probe wrench and sockets
- DE.C - PSA exhaust collar pliers
- 804 - feeler gauges
- D.110 - spark plug fitter
- AR - tools for gripping
- Thread repair tools
- Valve timing support
- Gearbox and clutch support
- Brakes support
- DF.18-01 - disc brake vernier caliper
- DF.19-01 - drum brake vernier caliper
- DF.16 - brake fluid tester
- DF.21 - adjustable-pressure electronic brake bleeder
- DF.20-12A - universal plug for bleeding brakes and clutches of LCV's and HGV's
- DF.20-07 - aluminium brake bleeder plug
- DF.17 - pneumatic piston pushing tool
- MOD.DFD - disc brake module
- DF.3 - wire brush
- DF.2 - hand-brake pliers
- 196.S - brake-spring pliers
- D.79A - hand-brake pliers
- D.104B - steady-spring tool
- MOD.DFT - drum brake servicing module
- DF.475A - flange press SAE/DIN
- 347 - flange press set for S.A.E., DIN, S.A.E./DIN fittings
- DF.23 - brake calliper piston pusher
- Suspension support
- Wheels and steering support
- MOD.208 - wheel nut tightening module, 40 -200 Nm
- 77A - cross braces, 17 - 32 mm
- U.179A - air-line connector and gauge, 0 - 12 bar
- NS.F - impact wrenches 1/2"
- NSAL.3 - set of long-reach thin wall sockets for alloy wheels, 17 - 21 mm
- N.709 - air hose reel
- D.93 - valve core remover
- D.3 - tyre-remover, 30 - 60 cm
- U.16 - ball joint pullers, 16 - 45 mm
- D.138 - lower ball-joint socket
- U.7 - steering ball joint separator
- D.143B - socket for angular tightening of the hub nut
- DM.14 - transmission collar clamp
- NM - sockets for hubs
- NS.MB - nasadka udarowa do nakrętek w kołach Mercedes
- DR.SIL - Silent valve core remover
- Hub pullers
- Bodyworks support
- Supports
- Stripping tools
- Air tools - bodywork
- Chisels
- 229A - boring bits, 3 - 30,5 mm
- 229A.ST - stepped bits, 4 - 38 mm
- VFA - filing burrs
- 225.J - end mills, 6 - 10 mm
- 230 - welding spot mill
- 270A.MA - steel wire brush
- 245.J1 - "Standard" kit for making round gaskets
- 235.J1 - set of 3 stainless steel scrapers
- 237.J1 - set of 3 flexible wide scrapers, 32, 50, 75 mm
- CR.PGC - gap controller
- Bodywork repair workstation
- Panel beating hammers
- Dollies and spoons
- Sanding wedges
- 851B - frame for milled files
- 850 - milled files
- CAD.9-10 - hand punch
- Forming tool sets
- MOD.CAR - bodywork modules
- Preparation workstations and painters support
- Windshield tools
- Dent removal
- Hydraulic equipment
- 518A - vice pliers for bodywork
- General workshop equipment
- Heavy goods and industrial vehicles
- Aerospace
- PROTO wrenches
- 57L - metric 15° hinged long-reach offset-ring wrenches, 5,5 -22 mm
- 57L - inch 15° hinged long-reach offset-ring wrenches, 7/32" - 7/8"
- 57L - spline 15° hinged long-reach offset-ring wrenches, 7 - 32
- 65SPL - spline 15° angled ratchet ring wrenches, 7/32" - 1'1/8"
- SBV - spline profile head ratchet ring wrenche, 7/32" - 1'1/8"
- J11 - long-reach ring wrenches, 1'1/16" - 11/16"
- J11SPL - spline profile ring wrenches, 1/4" - 1'
- J12SPL - spline profile combination wrenches, 1/4" - 1'
- PROTO socket tools
- J47SPL - 1/4'' spline profile sockets, 3/16" - 7/16"
- J47DPL - 1/4'' long-reach spline profile sockets, 3/16" - 7/16"
- 50DPL - 3/8'' long-reach spline profile sockets, 3/8" - 5/8"
- J47107 - 9-piece set of 1/4" hinged sockets, 7/32" - 9/16"
- J54 - 1/2" hinged sockets, 1/2" - 5/8"
- Ratchets for aerospace fasteners
- J47 - 1/4" knurled extensions
- J.S - 3/8" spline sockets, 3/8" - 5/8"
- J.SEL - 3/8" spline long-reach sockets, 3/8" - 9/16"
- J.RCK - 3/8" knurled locking extensions, 75 - 600 mm
- R.S - 1/4" spline sockets, 7/32" - 7/16"
- R.SEL - 1/4" spline long-reach sockets, 1/4" - 5/16"
- R.RCK - 1/4" knurled locking extensions, 55 - 600 mm
- Crowfoot bits
- 49 - 12-point high crowfoot flare bits 3/8", 5/8"- 1'1/16"
- J53 - 1/2" inch crowfoot open end bits, 1'1/16"- 2"
- J47MCF - 1/4" metric crowfoot open end bits, 7 - 14 mm
- J49MCF - 3/8" metric crowfoot open end bits, 9 - 24 mm
- J47FLA - 12-point 1/4" inch crowfoot end bits, 1/4"- 3/8"
- J47CF - 1/4" inch crowfoot open end bits, 1/4"- 9/16"
- J49CF - 3/8" inch crowfoot open end bits, 3/8" - 3'
- J.R - 12-point 3/8" drive adaptors
- J.SPR - 12-point 3/8" drive adaptors, metric
- J5100 - 9-piece set of 12-point 3/8" drive adaptors
- J.CF – 3/8" inch crowfoot open end bits, 3/8"- 3'
- J.CF – 3/8" metric crowfoot open end bits, 8 - 32 mm
- J.FL - 3/8" inch crowfoot box end bits, 5/8" - 1'1/16"
- R.CF - 1/4" inch crowfoot open end bits, 1/4" - 9/16"
- R.CF – 1/4" metric crowfoot end bits, 7 - 14 mm
- R.FLA - 1/4" inch crowfoot box end bits, 1/4" - 3/8"
- Sets of Crowfoot bits
- Bristol wrenches
- Torq Set bits
- Tri - wing bits
- Locking - wire pliers
- Aerospace toolkits
- Foam modules - "control system"
- FLUO tools
- PROTWIST FLUO screwdrivers
- AN.F - fluo screwdrivers for slotted head screws, 2,5 - 6 mm
- AW.F - fluo screwdrivers for slotted head screws, hexagonal blades 8 - 10 mm
- ANP.F - fluo screwdrivers for PHILLIPS screws PH0 - PH4
- AWP.F - fluo screwdrivers for PHILLIPS screw, hexagonal blades PH2
- AWSH.F - fluo handle hexagonal key, spherical head 2 - 8 mm
- AV.EF - FLUO screwdrivers for mixed heads, 2,5 - 5,5 mm
- AD.VEF - PROTWIST® 1000 Volt insulated screwdrivers for Pozidriv® screws, PZ1 - PZ2
- ADB.VEF - PROTWIST® BORNEO® screwdrivers for mixed heads - Pozidriv®
- AP.VEF - PROTWIST® 1000 Volt insulated screwdrivers for Phillips® head screws - FLUO, PH1 - PH2
- APB.VEF - PROTWIST® BORNEO® screwdrivers for mixed heads - Phillips® - FLUO
- ANDF - PROTWIST® screwdrivers for Pozidriv® screws - round blades, PZ0 - PZ2
- ANXRF - PROTWIST® screwdrivers for Resistorx® screws - FLUO
- Bit holders
- Sets of PROTWIST FLUO screwdrivers
- FLUO hexagon keys
- FLUO pliers
- Multigrip pliers, FLUO
- Round and half - round nose pliers, FLUO
- Combination pliers, FLUO
- Diagonal cutters, FLUO
- Flat-nose pliers, FLUO
- End cutters, FLUO
- Lock-grip pliers, FLUO
- Inside Circlip pliers, FLUO
- Outside Circlips pliers, FLUO
- Locking-wire pliers, FLUO
- "Connector" pliers, FLUO
- Plier sets, FLUO
- Wrenches FLUO
- 44F - Metric open end wrenches - FLUO
- 44F - Inch open end wrenches - FLUO
- 34F - Inch 15° and 75° hinged "midget" open end wrenches - FLUO
- 113A.CF - Chromed adjustable wrenches - FLUO
- 39F - Inch short-reach combination wrenches - FLUO
- 440F - Metric combination wrenches - FLUO
- 440F - Inch combination wrenches - FLUO
- 64F - Inch straight ratchet ring wrenches - FLUO
- 65F - Metric 15° hinged ratchet ring wrenches - FLUO
- 74A.F - Forged nut driver - metric - FLUO
- Bits FLUO
- ED.1TF - High Perf' bits series 1 for Pozidriv® screws - FLUO
- ED.60TF - High Perf' bits series 6 for Pozidriv® screws - FLUO
- EP.1TF - Standard bits series 1 for Phillips® screws - FLUO
- EP.1TF - EP.6TF - Standard bits series 6 for Phillips® screws - FLUO
- EH.1TF - Screw bits series 1 for metric countersunk hex head screws - FLUO
- EH.1FT - Screw bits series 1 for inch countersunk hex head screws - FLUO
- ES.1TF - High Perf' bits series 1 for slotted head screws - FLUO
- ETOR.TF - Standard bits series 1 for Torq Set® head screws - FLUO
- ETORM.TF - Standard bits series 1 for Torq Set® head screws - FLUO
- ETRI.1TF - Standard bits series 1 for Tri-wing head screws - FLUO
- EX.1TF - Standard bits series 1 for Torx® screws - FLUO
- Impact tools FLUO
- Measuring tools FLUO
- Ratchets and sockets FLUO
- Others tools FLUO
- PROTWIST FLUO screwdrivers
- PROTO wrenches
- SLS tooling
- Spare parts
- Tool gifts
- Sale
Blog Posts
New brochures | 18.06.2019 | 445Nowa oferta specjalna: FACOM akcja bestsellers 2019 / 2020
Read More
New products | 01.03.2019 | 888NEW: Adjustable wrenches: 101, 101.G, 101.GR
Read More
New brochures | 12.12.2018 | 1414New catalog: FACOM F18
Read More