Subcategories

  • DF.18-01 - disc brake vernier caliper

    • Vernier caliper for checking the thickness of brake discs.
    • Accurate, error-free reading.
    • Measurements can be taken with wheel in place (if no protective bodywork).
    • Can quickly demonstrate to customers the need for changing brakes.
    • Capacity 0 to 50 mm, outer thickness measurement of the disc brakes of cars and LCV's.
    • Nose length: 50 mm.
    • 0.1 mm reading increments.
    • Mechanical memory device.
    • Supplied in a reinforced fabric case with serial number for traceability in ISO certified workshops.
    Weight: 250 g.

  • DF.19-01 - drum brake vernier caliper

    • Capacity and reading to suit requirements of car, LCV and HGV applications.
    • Capacity: 40 to 300 mm, inner thickness measurement of brake drums on cars and LCVs.
    • Nose length: 100 mm.
    • 0.20 mm reading increments internal drum measurements for cars and LCVs.
    • 0.10 mm increments for readings between tips.
    • Supplied in a reinforced fabric case with serial number for traceability in ISO certified workshops.
    Weight: 700 g.

  • DF.16 - brake fluid tester

    • For testing brake fluids (DOT3 - DOT4 - DOT5.1).
    • Measures brake fluid boiling point.
    • Automatic test lasting up to 1 min.
    • LCD display.
    • °C / °F switch.
    • Accuracy: 3%.
    • Power supply: 12 V (vehicle battery).
    • Plastic case.
    • Dimensions (L. x W. x H.): 350 x 285 x 80 mm.

  • DF.20-12A - universal plug for bleeding brakes and clutches of...

    • Can be used for bleeding the brakes and clutches of 90% vehicles (incl. Asian makes, except Honda).
    • Can also be used for bleeding HGV clutches.
    • Claw system overcomes the many different bayonet shapes and different types and diameters of screw heads used by the various vehicle manufacturers.
    • Working diameter: 35 to 83 mm.
    • Minimum clearance required above the jar: 80 mm.
    • Maximum working pressure of the bleeder: 3 bar.
    • Connection by Rectus series 21 male coupling.
    • 90° swivel connection.
    • Dimensions (L. x W. x H.): 115 x 195x 85 mm.
    Weight: 475 g

  • DF.20-07 - aluminium brake bleeder plug

    • Special thread fits diameter 44 and 45 mm.
    • 90° swivel connection.
    • Minimum clearance required above the jar: 40 mm.
    • Used with DF.20 - DF.21 to automatically replenish the brake fluid jar.
    Weight: 70 g.

  • DF.17 - pneumatic piston pushing tool

    • Pneumatic cylinder for retracting and rotating the piston.
    • Can be used on clockwise and anti-clockwise pistons.
    • Max pressure 6.2 bars 1/4 NPT. Ø 10 mm 3/8”.

  • MOD.DFD - disc brake module

    • 31.14X15 and 31.16X17: extra-flat open-end wrench for removing locknuts from the caliper yokes.
    • 467F.12 - 13 - 14: 3 jointed ratchet combination wrenches for removing caliper yokes.
    • NJ.260: impact screwdriver + bit holder sockets.
    • NJ.236A: 3/8" bit holder impact socket.
    • 83SH.7: spherical head 6-point key 7 mm.
    • 249.G4: sheathed drift punch diameter 4 mm.

  • DF.3 - wire brush

    • For cleaning calipers.
    • Dimensions (L. x W. x H.): 225 x 45 x 15 mm.
    Weight: 65 g.

  • DF.2 - hand-brake pliers

    • For holding the handbrake cable spring.
    • For easy hook-up of hand-brake cable with both hands.
    • Set of 2 "spring stop" ends, dim.(L. x W.): 70 x 10 mm.
    • 1 magnetic bit holder ref AM.M1.
    Weight: 40 g (per bit).

  • 196.S - brake-spring pliers

    • For removing shoe springs.
    • Suitable for right-handed and left-handed working.

  • D.79A - hand-brake pliers

    • For easy hook-up of hand-brake cable.
    • Length: 230 mm.
    Weight: 180 g.

  • D.104B - steady-spring tool

    • Fits steady-spring caps for compression against drum-brake shoes.
    • Adapts to all makes.
    • Length: 240 mm.
    • Diameter: 34 mm.
    Weight: 240 g.

  • MOD.DFT - drum brake servicing module

    • Including:
    - D.104A: Steady-spring tool.
    - DF.2: Hand-brake cable screwdriver.
    - D.79A: Hand-brake pliers.
    - 43.8x10 - 43.11x13: Flare-nut wrenches.
    - Tray PL684.
    Weight: 855 g.

  • DF.475A - flange press SAE/DIN

    • Specifically designed for flanging (diam. 4.75 mm) automotive brake lines.
    • SAE or DIN fittings are formed easily with the help of its 3 T hydraulic jack.
    • Compact size allows working in situ on vehicles.
    • Diameter: 4.75 mm.
    • Dimensions (L. x W. x H.): 212 x 200 x 75 mm.
    Weight: 1.100 kg.

  • DF.23 - brake calliper piston pusher

    • Pushes back double or quadruple pistons perfectly parallel simultaneously.
    • Thrust power 215 kg with one hand (2,200 N).
    • Handle can be used to push or release pressure.
    • Rotating head: easy work to the left and right.
    • Audi / Mercedes / BMW / Renault (e.g. Megane RS)/ Citroën (e.g. DS3 Racing) specifications.
    Weight: 1.271 kg.

Products

per page
Brakes support  There are 44 products.
Showing 1 - 20 of 44 items

Categories

( products)

Blog Posts

Ask for product

* Required field

Newsletter

newsletter.jpg

We are glad that you would like to receive our newsletter!


We promise that the content will be interesting, and we do not intend to send it more often than once a month :) If you want to read from time to time about new products and tool promotions, please check below consent and provide your email address.

Please be advised that in order to optimize the content available on our website, to adapt them to your individual needs, we use information saved using cookies on end users' devices. Cookie files can be controlled by the user using the settings of your web browser. By continuing to use our website without changing your browser settings, you accept the use of cookies. Read more: Privacy policy.